Vendor productsProducts found: 770

BAT Trims Aluminium Tiling Angle Mill Finish 12mm X 3m Long The purpose of Aluminium Angle is to provide protection of a tiled corner against chipping and wear. Aluminium is widely used, and has the flexibility of being able to be produced in a wide range of finishes / colours that can be...

INFORMATION ARDEX FS-DD Non-sanded cement-based, wall and floor grouting compound which is specially designed for polished porcelain to avoid scratching the surface of the tile. Water repellent due to special hydrophobing agent Dirt resistant – longer lasting new look, as dirt is unable...

Davco SMP Evo A flexible cement-based tile adhesive specifically designed for premium stone, marble and porcelain tiles and featuring our Dust Less Technology. Suitable for interior and exterior applications. Commercial and domestic walls and floors. Features & Benefits Dust Less...

Bostik Seal N' Flex 1 is a low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough and flexible seal capable of cyclic expansion and compression movement of 100% (+ 50%) of the original installed joint width.

Davco Ultraprime An acrylic surface primer designed to increase the bond strength of tile adhesives and waterproofing membranes. Suitable for interior and exterior applications. Commercial and domestic walls and floors. Features & Benefits Use prior to tile adhesives and...

Duromastic P15 DIAMOND is a polyurethane modified copolymer acrylic waterproofing membrane specifically formulated for bathrooms, laundries, balconies, terraces and other wet area.

Two-component, high-flexibility cementitious mortar (with crack-bridging capacity up to 2 mm) applied by trowel or roller for waterproofing balconies, terraces, bathrooms and swimming pools

INFORMATION ARDEX X 56 A highly flexible tile adhesive that is also fast setting. This makes ARDEX X 56 suitable for tiling directly to timber and over heated slabs. Highly flexible – achieves S2 classification, tile direct over timber Suitable for early age concrete/screeds High yield...

INFORMATION ARDEX SE ARDEX SE is an acetoxy curing silicone for applications such as movement joints (between tiles), internal corners (tiled wall and floor) and connecting joints between tiled surface and benchtops, bath edges, cupboards, splashbacks. Flexible sealant (up to 25%...

ARDEX WPM 300 is a two component water based epoxy polyamide membrane/barrier coating.

A water-based, synthetic polymer grout additive specially formulated for use with cement-based grouts. It imparts improved adhesion strength, flexibility and abrasion resistance.

A sanded, cement-based tile grout. It is ideal for use in joint widths 2mm to 50mm wide without shrinking. Exceptionally easy to use and has superior colour consistency.

ARDEX P9 Single Part Primer is a water-based primer used for improving the adhesion of ARDEX products to smooth, dense and various non-porous substrates.

BAT Trims Aluminium Tiling Angle Mill Finish 11mm X 3m Long The purpose of Aluminium Angle is to provide protection of a tiled corner against chipping and wear. Aluminium is widely used, and has the flexibility of being able to be produced in a wide range of finishes / colours that can be...

Davco Sanitized ColorgroutA cementitious grout designed for use with most types of ceramic tiles and natural stone applications available in a large range of colours. Suitable for interior and exterior applications. Commercial and domestic walls and floors. Be sure to use our handy Davco Grout...

All-in-one rapid drying water-based membrane

Information ARDEX Multiprime ARDEX Multiprime is a water-based primer for improving adhesion of ARDEX products to various porous substrates. Water-based – no solvent hazard Quick drying Improves adhesion Substrates: Fibre-cement sheet Concrete, render, screeds Masonry and...

BAT Trims Aluminium Tiling Angle Mill Finish 10mm X 3m Long The purpose of Aluminium Angle is to provide protection of a tiled corner against chipping and wear. Aluminium is widely used, and has the flexibility of being able to be produced in a wide range of finishes / colours that can be...

BAT Trims Aluminium Tiling Angle Matt White 12mm X 3m Long The purpose of Aluminium Angle is to provide protection of a tiled corner against chipping and wear. Aluminium is widely used, and has the flexibility of being able to be produced in a wide range of finishes / colours that can be...

BAT Trims Aluminium Tiling Angle Matt Black 11mm X 3m Long The purpose of Aluminium Angle is to provide protection of a tiled corner against chipping and wear. Aluminium is widely used, and has the flexibility of being able to be produced in a wide range of finishes / colours that can be...