Bostik 9210 1 litre Primer
Description
Bostik 9210 primer is designed for promoting adhesion to thermoplastic polyolefins (TPO). Bostik 9210 primer can be used in conjunction with Urethane, Silicone Modified Polymers (SMP) and epoxy adhesives.
Features
- Enhances adhesion to polypropylene surfaces.
- Easy to apply
Recommended Uses
- Pre-treatment of polypropylene plastics prior to bonding with Simson, Matrix, Seal-n-Flex etc
Application Instructions
Surface Preparation
Ensure surfaces to be bonded are clean, dry and free from dust, oil, grease etc
Application
Apply Bostik 9210 primer by brush, dip or spray. For optimum adhesion, the dry film thickness of Bostik 9210 primer should be approximately 2.5 micron.
Allow primer to air-dry for 20 to 30 minutes at room temperature. Primer may also be oven dried at 100°C for 5-10 minutes. A heat cycle generally improves adhesion.
Coverage
Approximately 10m2 per litre.
Properties
- Appearance - Pale yellow to amber liquid
- Viscosity (cps) - Approx. 10
- Specific Gravity - Approx. 0.86
- Solids Content Approx. 3%
Storage & Shelf Life
Store in a cool dry place away from direct sun light and any source of ignition.
Shelf life is 12 months from date of manufacture when stored at 20 - 30°C in original, unopened container.
Health & Safety
Bostik 9210 is highly flammable. Keep away from heat and naked flame. Avoid breathing
vapours and contact with skin and eyes.
Refer to the M.S.D.S. for specific details.
Clean-Up
Use a dry cloth wipe to remove wet primer. Remove dried primer with Bostik 9934 or a 9907
solvent.
No reviews found