Demtech LS151 Primer 15 Litres Resurfacing Primer
LS151 Primer 15L
Say goodbye to expensive and hazardous epoxy/polyurethane adhesives! Our Cureflex LS151 Resurfacing Primer is designed specifically to prepare non-porous surfaces for tiling, rendering, and other construction materials.
It effectively enhances the bond between the tile adhesive and substrate, reducing the risk of the tiles cracking or loosening in the future.
Cureflex LS151 has been field and laboratory tested to ensure it satisfies and exceeds industry requirements.
The solvent free primer can be applied using a brush or roller.
LS151 Resurfacing Primer | Construction Primer | Solvent-Free Primer | Non-Hazardous Primer
Our LS151 Construction Primer provides a quick and cost-effective solution when compared to epoxy or polyurethane adhesives.
It is fast drying, water resistant, and free of hazardous odours/vapours.
1L provides approximately 10-12m2 coverage.
No grinding or etching required.
PRIMING USES
Helps prime before:
- Self leveller & Ceramic tiling
- Waterproofing & Rendering
- Screeding & Vinyl laying
- Carpet laying & Floorboards
SUITABLE MATERIALS
- Insitu® products including shower bases, niches and balcony panels.
- Cureflex® waterproof membranes
- Exposed metal surfaces such as aluminium, stainless steel, brass, copper, even galvanised iron.
- Polished surfaces such as porcelain
- Solid timber boards that have been sealed (with a laquer for example).
- Glazed surfaces such as ceramic tiles, glass bench-tops, glass splash-backs and other sealed surfaces
- Other non-porous and shiny surfaces including PVC and ABS plastics, vinyl, paint, laminex, epoxy and polyurethane finishes.
CURING & COVERAGE
- Ensure concrete slab has cured for a minimum of 28 days before priming.
- Ensure screeds have cured for a minimum of 7 days before priming.
- Ensure waterproof membranes have cured for a minimum of 24 hours.
- All substrates must be clean and free from any contaminants before application.
- Typical applications will only require 1 coat.
- Apply evenly over all surfaces, while carefully avoiding pooling.
- Allow the product to dry completely before the subsequent application of any membranes or adhesives (15-30 minutes, temp. dependant).
- Non-Porous Surface Primers
- Epoxy and polyurethane finishes ,
- Glazed surfaces ,
- Laminex ,
- Metal surfaces ,
- Non-porous surfaces ,
- Paint ,
- Porcelain ,
- PVC and ABS plastics ,
- Sealed timber ,
- Vinyl
No reviews found