Demtech PG57 Primer 15L 15 Litres Acrylic Primer And Additive
PG57 Primer 15L
Cureflex PG57 Primer is a high performance liquid additive designed to offer much more than priming substrates. It can be used as a general purpose primer over open porous surfaces and as a liquid additive to cement based construction chemicals. Adding Cureflex PG57 Primer to other products will increase strength, improve flexibility and workability, create high adhesion properties and extend working time.
INTRODUCTION
Cureflex® PG57 is a high performance liquid primer that can do much more than just prime substrates.
It can be used as a general purpose primer over open, porous surfaces or as a liquid additive to cementitious construction adhesives and membranes.
Cureflex® PG57 is a non-tacky, styrene-acrylic polymer, engineered for both commercial and domestic use as a high performance bonding agent.
Using it as an additive in other products will increase strength, improve flexibility and workability, increase adhesion properties and extending working time.
FEATURES & BENEFITS
- Ready for immediate use.
- Solvent free formulation.
- Easy to apply with a brush or roller
- Suitable for internal and external use.
- High level of water resistance.
SUITABLE MATERIALS
Suitable for use on:
- Concrete, screed and Hebel.
- Plasterboard and Scyon.
- Villaboard sheeting.
- Bricks and mortar.
- Tile underlay.
PRIMING USES
Helps prime before:
- Self leveller.
- Ceramic tiling.
- Waterproofing
- Rendering.
- Screeding.
- Vinyl laying.
- Carpet laying.
- Floorboards.
CURING & COVERAGE
- Ensure concete slab has cured for a minimum of 28 days before priming.
- Ensure screeds have cured for a minimum of 7 days before priming.
- Ensure waterproof membranes have cured for a minimum of 24 hours.
- All substrates must be clean and free from any contaminants before application.
- Typical applications will only require 1 coat. Very porous surfaces may require a 2nd coat.
- Apply evenly over all surfaces, while carefully avoiding pooling.
- Allow the product to dry completely before the subsequent application of any membranes or adhesives.
- Will not prime surfaces or cure when applied to non-porous materials such as cured membranes, metals, plastics (Use Cureflex® LS151 instead).
ADDITIVE USES
Can be added to:
- Cementitious membranes
- Tile adhesive and mortar mixes.
- Screeds, renders and grouts
No reviews found