Devi DEVIreg Room Thermostat - 2 Years Warranty
Devi DEVIreg Room Thermostat
DEVIreg™ Room is an intuitive programmable timer thermostat, for combined, room or floor temperature control, complying with Eco design Lot 20, used for controlling electrical floor heating elements, according to the room temperature. The thermostat is designed for fixed installation only. Due to the special designed 2-part construction it fits a wide range of frames. The thermostat features a dial for manual temperature setting, feature enabling and intuitive control. DEVIreg™ Room is fast and intuitive to setup using the in app wizard. It has an energy saving program - including an optimum start (pre-heat) control ensuring the desired temperature, with a wide range of floor sensors, at the correct time and thereby reducing the heating costs significantly.
Benefits
- Eco design compliant Lot 20
- Works out of box
- Bluetooth thermostat
- In app setup wizard
- Fits extensive frame selection
- Compatible with 7 sensors types
- Sensor failure monitoring
- Adaptive PWM control
- Pre Heating
- Multilanguage app
- Shine through indicators
- Quick exchange system
- Multiple control modes
- Tested best in class design
Product Details
| Nominal voltage | 220 - 240 V, 50/60 Hz |
| Standby power consumption, max | 0,2 W |
| Relay: Resistive load Inductive load |
16A / 3680W @ 230V Cos Φ = 0.3 max. 1A |
| Compatible sensors | NTC 15 kΩ @ 25 °C, 3 m. (default) NTC 2 kΩ @ 25 °C NTC 6.8 kΩ @ 25 °C, NTC 10 kΩ @ 25 °C, NTC 12 kΩ @ 25 °C, NTC 33 kΩ @ 25 °C, NTC 47 kΩ @ 25 °C |
| Regulation | PWM - Pulse Width Modulation |
| Frost protection | 4 °C - 14 °C (default 5 °C) |
| Temperature range | 5 °C to 35 °C 15 °C to 35 °C (room) |
| Cable specification for connectors terminals | Max: 1 x 4 mm2 or 2 x 2.5 mm2 |
| Ball pressure test | 75 °C |
| Pollution degree | 2 (domestic use) |
| Software class | A |
| Controller type | 1 B |
| Storage temperature and conditions | -25 °C to 60 °C, 90% RH non-condensing |
| Operating temperatures and conditions | 0 °C to 35 °C, 90% RH non-condensing |
| IP class | 21 |
| Protection class | Class II - |
| Immunity against voltage surges | Over Voltage Category III |
| Dimensions (H/W/D): | 85 mm x 85 mm x 20-24 mm (in-wall depth: 22mm) |
| Weight, net | 204 g |
| Battery back-up time, min. | 1 hour |
No reviews found
