https://www.tradiecart.com.au/enviro-systems/
Enviro Systems Buyer's Guide — TradieCart
This guide helps you choose the right Enviro Systems product for your job. Envirosystems is a proudly Australian-made and owned manufacturer with over 30 years of experience in waterproofing, protective coatings, and remedial solutions — trusted on projects from residential bathrooms to the Sydney Harbour Bridge.
Product Range
| Product | Best For |
|---|---|
| Enviro 700X (Grey, 15L) | Premium single-component polyurethane waterproofing membrane for internal wet areas — bathrooms, podiums, basements, and retaining walls. AS/NZS 4858:2004 Class 3 approved. Low odour, moisture curing, no mixing required. The step-up from 200P Ultra when you need Class 3 certification or single-component convenience |
| Enviro 200P Ultra (Grey, 15L) | Modified polyurethane waterproofing membrane for internal wet areas. The most widely stocked Enviro membrane and a cost-effective choice for standard residential bathrooms and wet areas where Class 3 certification is not required |
| Enviro 500 EXT (Green, 15L) | Water-based, single-component modified polyurethane membrane for external applications — podiums, roof decks, terraces, and balconies. Cure-controlled drying for Australian conditions. The go-to for any external waterproofing job |
| Enviro Clad (8 colours, 4L & 15L) | Single-pack acrylic UV-resistant waterproof membrane for exposed external surfaces needing a colour finish. Available in White, Antique White, Light Grey, Mid Grey, Grey Dusk, Gravel, Hog Bristle, and Sandstone |
| Enviro Hydrostatic 1 (15kg) | Cementitious waterproofing membrane for below-grade applications with hydrostatic pressure |
| Trafficable Coatings (950 TC, 820 TC, 900, 250 NS) | Two-part polyurethane trafficable coatings for car parks, walkways, balconies, and commercial flooring. 950 TC and 900 are standard trafficable coatings; 250 NS adds non-slip finish. 950 TC pigment packs available in 5 colours (Koala Grey, Neutral Grey, Dark Grey, Black, Neutral White) |
| Primers (Prime WB, Prime SB, Prime P2, Shield) | Full primer range for surface preparation — water-based (WB), solvent-based (SB), polyurethane (P2), and water-based epoxy (Shield). Available in 4L, 10L, 15L, and 20L kits |
| Enviro Flex Sealants (FL, FC — 600ml) | Fast-curing polyurethane joint sealants for movement and expansion joints |
| Epoxy Coatings & Binders (Epoxy B, Ultra Tuff, Epoxy B-NS, Epoxy B-LV) | Epoxy resin primers, mortar binders (non-sag and low viscosity), and heavy-duty floor coatings for industrial and commercial applications |
| Enviroseal Sealers & CSH (WB, SB — 4L & 15L, CSH 15L) | Water-based and solvent-based concrete sealers plus concrete surface hardener for protecting and finishing concrete floors |
| Remedial Products (Gel 155, Gel 165, Mortar 45, Plug) | Injection polyurethanes for crack sealing (Gel 165 hydrophilic option for active water leaks), concrete repair mortar, and fast-setting water plug for remedial waterproofing |
| Accessories (Deckweb 100mm x 50m, GTX 15kg) | Reinforcement fabric roll for membrane detailing and superior-grade tile adhesive |
All Enviro Systems products are Australian made and designed, with same-day delivery available in Metro Melbourne.
Quick Recommendation Guide
- Standard residential bathroom waterproofing → Enviro 200P Ultra — cost-effective modified PU membrane for everyday internal wet areas
- Internal waterproofing requiring AS/NZS 4858 Class 3 certification → Enviro 700X — single-component, low odour, no mixing, Class 3 approved
- External waterproofing (balconies, podiums, decks) → Enviro 500 EXT — water-based, cure-controlled drying for Australian conditions
- Exposed surfaces needing a colour finish → Enviro Clad — UV-resistant acrylic membrane in 8 colours
- Trafficable car park or walkway coating → Enviro 950 TC or 900 — two-part PU coatings with colour pigment options
Key Features & Benefits
- Australian Made & Owned — manufactured locally for over 30 years, formulated for Australian conditions
- Low VOC Formulations — environmentally responsible products with low or very low VOC content
- Single-Component Convenience — key products like 700X and 500 EXT require no mixing, reducing on-site errors
- Complete System Solutions — primers, membranes, coatings, and sealants designed to work together
- UV Resistant Options — Enviro Clad and 500 EXT rated for long-term external UV exposure
- Technical Advisory Centres — dedicated support in Sydney, Melbourne, and Perth
Common Questions
Should I use 700X or 200P Ultra for my bathroom? — For standard residential bathrooms, 200P Ultra is the cost-effective choice and the most widely stocked Enviro membrane. Step up to 700X when your project requires AS/NZS 4858 Class 3 certification, or when you want the convenience of a single-component moisture-curing system with no mixing. Both are suitable for internal wet areas.
Which membrane for external waterproofing? — Enviro 500 EXT is designed specifically for external applications — balconies, podiums, roof decks, and terraces. Its cure-controlled drying handles Australian heat and wind. For exposed surfaces needing a decorative colour finish, use Enviro Clad instead.
What primer should I use with Enviro membranes? — Use Enviro Prime WB (water-based) for most internal applications, Enviro Prime SB (solvent-based) for difficult substrates, or Enviro Shield (epoxy) for moisture-sensitive surfaces. Check the relevant product data sheet for the recommended primer system.
Can Enviro products handle below-grade waterproofing? — Yes. Enviro Hydrostatic 1 is a cementitious membrane designed for hydrostatic pressure applications. For active water leaks, use Enviro Gel 165 (hydrophilic injection polyurethane) to seal cracks before applying the membrane system.
What is the difference between 950 TC and 900? — Both are trafficable polyurethane coatings, but 950 TC is a two-part system with pigment colour options (5 colours available), while 900 is a standard trafficable coating. Choose 950 TC when you need a colour-matched finish for commercial or decorative applications. For non-slip surfaces, consider 250 NS.
Why Choose Enviro Systems?
- Proudly Australian made and owned for over 30 years — products formulated and manufactured locally for our conditions
- Proven on iconic projects including the Sydney Harbour Bridge, Royal Children's Hospital Melbourne, and major commercial developments nationwide
- Low VOC and environmentally responsible formulations across the range
- Same-day delivery available in Metro Melbourne via TradieCart
- Technical advisory centres in Sydney, Melbourne, and Perth with expert support