Flooring

Sikalastic®-1K is a one component, flexible, fibre-reinforced mortar, based on cement modified with special alkali-resistant polymers. It also contains fine fillers, selected graded aggregates, plus special waterproofing additives to produce a flexible mortar that is ideal for waterproofing surfaces subject to flexural strain.

Sika MaxTack is a one part high strength, copolymer dispersion adhesive.

Sikaflex 11FC is a fast curing one-component polyurethane sealant/adhesive with permanent elasticity.

Sikaflex 11FC is a fast curing one-component polyurethane sealant/adhesive with permanent elasticity.

Sikafloor-263 SL/264 is a 2-component solvent free pigmented epoxy resin based flooring system. The material can be classified into three systems: 1. Sikafloor-264: a high build roll on coat 2. Sikafloor-263 SL: a smooth self levelling floor topping system 3. Sikafloor-263 NS: an anti-slip self levelling floor topping system.

ECO SYSTEMS ECO SCREED is a pre blended screed underlayment consisting of graded sand, cement and additives specially formulated for interior and exterior floors prior to the installation of AquaBlokTM waterproofing membranes, ceramic tiles, natural stone, carpet, wood and parquetry flooring. Suitable for a variety of domestic and commercial application.

MCB A-66 is a high strength, polymer and rubber modified, flexible, cement based adhesive which has been specially formulated to provide extra flexibility and extended coverage. It is suitable for most tiling applications including green screeds and it can be used in both internal and external situations for floor and wall tiling.

High performance, self-levelling and fast drying compound for interior or exterior use up to 30mm.

Sikalastic-488/488SL (au) is a high performance, hand-applied, low VOC, moisture-curing single-pack elastomeric polyurethane waterproofing membrane. Sikalastic-488/488SL (au) is directly foot-trafficable.

Sikaflex-PRO is a one component, thixotropic, polyurethane based joint sealant. It cures under the influence of atmospheric moisture to form an elastomeric material with adhesive properties, in some cases without the need for priming of the substrate.

Enhance Colours is a 2L tinting system designed to compliment Crommelin™ Enhance Satin by providing a colour alternative to rejuvenating aged concrete and masonry. When used in conjunction with Crommelin™ Enhance Satin, Enhance Colours is an ideal alternative to paving paints.

Sikagard-62 is a two component high build thixotropic protective coating based on epoxy resin. When cured Sikagard-62 provides a hard, glossy film with high resistance to abrasion and chemical attack.