Floor Levelling & Screed

Fast hardening levelling/ smoothing compound for thicknesses from 3 mm to 70 mm: especially recommended for pumping

Fibre-reinforced levelling compound for interiors for thicknesses from 3 to 40 mm in a single application.

ECO SYSTEMS ECO SCREED is a pre blended screed underlayment consisting of graded sand, cement and additives specially formulated for interior and exterior floors prior to the installation of AquaBlokTM waterproofing membranes, ceramic tiles, natural stone, carpet, wood and parquetry flooring. Suitable for a variety of domestic and commercial application.

INFORMATION ARDEX LQ 92 ARDEX LQ 92 is a cement-based underlay for levelling uneven concrete floors prior to tiling. Not recommended for use under vinyl coverings. Self smoothing Polymer modified – apply from feather edge to 25mm Early walkability – tile over after approx 4 hours...

Bostik Ultra Level Screed C310 Cementitious levelling screed ⠀ Product overview A fast setting high build modified cementitious levelling screed. Specially formulated for quick and easy application to achieve required falls without any shrinkage or cracking. ⠀ ABOUT ULTRA LEVEL...

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds.

Mapei NOVOPLAN 21 Fast hardening self-levelling smoothing compound for thicknesses up to 10 mm. Where to use: • Smoothing in interiors of new and existing substrates, including heated screeds, to prepare them for the installation of PVC, rubber and carpet flooring. • Smoothing existing...

ULTRA LEVEL C500 Superior vinyl and timber underlay ⠀ Product overview Bostik ULTRA LEVEL C500 is a rapid-hardening polymer-modified cementitious underlay, formulated for maximum flow without shrinkage or cracking. ⠀ Product overview Bostik ULTRA LEVEL C500 is a...

LEVEL is a cement-based underlayment for use in levelling interior substrates.

High flow cement-based self-levelling

Description No need to add latex with this factory prepared sand and cement mortar with polymer additives. Available in grey 25kg Uses Can be used as a semi dry screed mortar or add it to a plastic render for a wide range of applications. As a slurry bond coat it can be used as...

3701 Fortified Mortar Bed is a polymer fortified blend of carefully selected polymers, portland cement and graded aggregates.

Mapei PRIMER G Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling. The surfaces to be treated must be clean and porous. Dilute Primer G...

Mapei PRIMER G Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling. The surfaces to be treated must be clean and porous. Dilute Primer G...

ADESILEX P4 Fast-setting cement based levelling compound for internal and external use from 3 to 20 mm thick. Applications: Internal and external levelling compound for all normal supports used in building provided they are clean, such as concrete slabs, cement screeds, old ceramic...

Efflock is a high performance, water based, VOC free, liquid additive designed for the bulk impregnation of cement based building materials to protect against efflorescence and damp.

Information ARDITEX NA ARDITEX NA is formulated with excellent adhesion designed to work perfectly UNDER a damp proof membrane. Also used to pre-level existing timber floors prior to the installation of timber sheeting for a stable base for new floor coverings. Thickness: Feather...

Sand & Cement Sand & Cement is a carefully proportioned blend of graded sands and cement, designed for use as a general purpose mortar product. Sand & Cement can be used in certain handyman, landscaping and plumbing applications and is suitable for use with various substrates.

Information ARDEX E 90 A special synthetic dispersion additive for use in conjunction with ARDEX cement-based adhesive, such as ARDEX S 16 and ARDEX STS 8. Allows direct fixing over existing tiles (in internal dry areas) Provides water repellent mortar Improves adhesion and imparts...

Normal Set 40 is a self levelling modified cementitious underlay.

The Cement Australia Oxides range gives you unlimited possibilities to improve the aesthetics of concrete, mortars and renders through coloured finishes.

Efflock is a high performance, water based, VOC free, liquid additive designed for the bulk impregnation of cement based building materials to protect against efflorescence and damp.

Universal acrylic primer for all absorbent and non-absorbent substrates.

Gripset C-BED Premium Grade Screed Premium grade, polymer enhanced cementitious compound designed for high performance screeding applications. The unique polymer formulation provides excellent water resistance and high strength properties for use in critical areas subject to continuous...

211 Crete Filler Powder is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates.

Mapei PRIMER G Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling. The surfaces to be treated must be clean and porous. Dilute Primer G...

3701 Fortified Mortar Bed is a polymer fortified blend of carefully selected polymers, portland cement and graded aggregates.

Mapei Mapecem Pronto 20kg Fast Set Screed ⠀ DESCRIPTION Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. ⠀ TECHNICAL DATA Mixing ratio: 20 kg bags of MAPECEM PRONTO with approximately 1.5 - 1.7 litres of water. Workability...

3701 Fortified Mortar Bed is a polymer fortified blend of carefully selected polymers, portland cement and graded aggregates.

BAT Spike Roller 21mm Spike X 500mm Wide Roller

Information ARDEX E 90 A special synthetic dispersion additive for use in conjunction with ARDEX cement-based adhesive, such as ARDEX S 16 and ARDEX STS 8. Allows direct fixing over existing tiles (in internal dry areas) Provides water repellent mortar Improves adhesion and imparts...

ARDEX A 38 is a rapid set cement screed that has been designed for all types of floor coverings and is especially effective when installing moisture sensitive coverings.

ARDEX A 36 Abascreed is a factory proportioned premixed sand/cement screed for internal and external use.

Efflock is a high performance, water based, VOC free, liquid additive designed for the bulk impregnation of cement based building materials to protect against efflorescence and damp.

211 Crete Filler Powder is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates.

Davco Lanko 133 Pro Floor Leveller A self levelling, high strength, cement-based underlayment designed for levelling internal and external commercial floors. Used to repair, fill or level surfaces in new construction or for corrective work. Features & Benefits Suitable for wet areas,...

The Cement Australia Oxides range gives you unlimited possibilities to improve the aesthetics of concrete, mortars and renders through coloured finishes.

Sure Level Floor Screed 20kg Sand & Cement Screed

ARDEX K 65 Single-Part Timber Leveller Ideal for timber substrates Rapid hardening – walkable in just 2 hours Microtec fibre-reinforced Information ARDEX K 65 ARDEX K 65 is an advanced fibre reinforced smoothing and levelling compound for internal use, featuring MICROTEC technology...

A bonding agent designed to improve shear and tensile bond strength of sand/cement screeds, renders and ARDEX standard cement-based adhesives.

ARDEX A 48 is a rapid set cement screed preparation that has been designed for all types of floor coverings and is especially effective when installing moisture sensitive coverings.

The Cement Australia Oxides range gives you unlimited possibilities to improve the aesthetics of concrete, mortars and renders through coloured finishes.

PRIMER - ABSORBENT SUBSTRATES Primer A Eco develops an isolating, cohesive film which neutralizes the expansive chemical reaction of gypsum- or anhydrite-based substrates in contact with mineral mortars and adhesives. Reduces and regulates the absorption of highly porous substrates.

226 Thick Bed Mortar is a factory prepared blend of carefully selected raw materials, portland cement and graded aggregates for use with 3701 Mortar Admix.

The Cement Australia Oxides range gives you unlimited possibilities to improve the aesthetics of concrete, mortars and renders through coloured finishes.

211 Crete Filler Powder is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates.

The Cement Australia Oxides range gives you unlimited possibilities to improve the aesthetics of concrete, mortars and renders through coloured finishes.

Description No need to add latex with this factory prepared sand and cement mortar with polymer additives. Fast set is excellent for multi bathroom projects and allows surfaces to be waterproofed after 4-5 Hours. Available in Grey 25kg Uses Can be used as a semi dry screed...

Solvent-free, low odour acrylic primer in water dispersion with very low emission of volatile organic compounds (VOC)

Rapid Drying Smoothing Compound

ARDEX K 10 Reactiv8 Excellent levelling and self-healing properties with long open times, can be reactivated Easy to install – from 1.5mm to 15mm in one pour Walkable in 2-3 hours Information ARDEX K 10 Reactiv8 ARDEX K 10 Reactiv8™ is a premium self-levelling and smoothing...

211 Crete Filler Powder is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates.

High quality, pre-mixed latex liquid primer. Sikafloor Level PRO Primer is a pre-mixed latex liquid designed for the priming of porous substrates prior to the use of Sikafloor® Cement based levelling products.

High performance, self-levelling and fast drying compound for interior or exterior use up to 30mm.

Information ARDITEX NA ARDITEX NA is formulated with excellent adhesion designed to work perfectly UNDER a damp proof membrane. Also used to pre-level existing timber floors prior to the installation of timber sheeting for a stable base for new floor coverings. Thickness: Feather...

Type 70 spirit level, lightweight box frame 2 vials

Information ARDEX K 60 ARDITEX ARDEX K60 Arditex is your two part latex liquid and cementitious powder rapid setting smoothing and levelling compound that possesses outstanding adhesion properties, making it an ideal choice for various substrates. The K60 Arditex with its enhanced...

Ardex Gravel Mix Bag 20kg

ECO SYSTEMS ECO SCREED is a pre blended screed underlayment consisting of graded sand, cement and additives specially formulated for interior and exterior floors prior to the installation of AquaBlokTM waterproofing membranes, ceramic tiles, natural stone, carpet, wood and parquetry flooring. Suitable for a variety of domestic and commercial application.

Type 70 spirit level, lightweight box frame 2 vials

Information ARDEX E 90 A special synthetic dispersion additive for use in conjunction with ARDEX cement-based adhesive, such as ARDEX S 16 and ARDEX STS 8. Allows direct fixing over existing tiles (in internal dry areas) Provides water repellent mortar Improves adhesion and imparts...

Synthetic Resin-Based Primer

A liquid polymer additive for use with standard grade cement-based adhesives, such as ARDEX Quickbond, to impart flexibility and improved adhesion, water resistance and shear strength.