Laticrete Tile adhesive

335 Premium Flexible Adhesive is a high performance thin-bed adhesive for installing a wide range of tiles and stone including low absorption ceramic tile, porcelain tile, natural and manufactured stone using thin-set method of installation.

Ultra X8 Polymer Fortified Flexible Adhesive is a creamy and smooth to trowel thin-set adhesive for installing all types of tile and stone over a wide range of surfaces.

LATAPOXY 300 Adhesive is a chemical resistant, epoxy adhesive that will bond to most sound, clean surfaces. The adhesive spreads easily and cleans with water while fresh.

MVIS™ Veneer Mortar is a patented, versatile polymer fortified mortar designed specifically for the installation of adhered masonry veneer, stone and thin brick.

254 Platinum Adhesive is the ultimate one-step, polymer fortified, thin-set mortar for interior and exterior installation of ceramic tile, stone, quarry tile, pavers and brick.

LATAFLEX Gold Adhesive is a superior performance polymer fortified, rubber reinforeced thin-set adhesive for installing ceramic tile and stone using the thin-bed method of installation

315 Super Floor & Wall Adhesive (Previously 290 Super Floor & Wall Thin-Set Adhesive) is a high performance thin-set adhesive to install tile and stone using the thin-bed method of installation. Mix with water or fortify with LATICRETE latex admixture.

335 RAPID Premium Flexible Adhesive is a high performance thin-bed adhesive for installing a wide range of tiles and stone including low absorption ceramic tile, porcelain tile, natural and manufactured stone using thin-set method of installation.

335 Premium Flexible Adhesive is a high performance thin-bed adhesive for installing a wide range of tiles and stone including low absorption ceramic tile, porcelain tile, natural and manufactured stone using thin-set method of installation.

STONETECH BulletProof Sealer is an advanced sealer, designed to provide maximum protection on nature stone against the toughest oil and water-based stains.

STRATA_MAT™ is a next generation high performance uncoupling mat for use under ceramic tile and stone installations, for both residential and commercial applications.

125 TRI MAX™ provides incredible sound isolation protection while simultaneously protecting the tile or stone finish from any cracking by reducing the transmission of stresses in the substrate through to the tile or stone finish.

STONETECH BulletProof Sealer is an advanced sealer, designed to provide maximum protection on nature stone against the toughest oil and water-based stains.

335 Premium Flexible Adhesive is a high performance thin-bed adhesive for installing a wide range of tiles and stone including low absorption ceramic tile, porcelain tile, natural and manufactured stone using thin-set method of installation.

211 Crete Filler Powder is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates.

4237 RAPID Latex Additive is a specially designed latex additive for use with 211 to make high strength latex thin bed and medium bed adhesive up to 15 mm. For installing all types of tile, stone and agglomerates.

PRIME-N-BOND™ is a versatile, ready-to-use, single coat, low VOC primer designed to enhance the adhesion of adhesives to many smooth and non-absorptive substrates that can be difficult to bond to.

4237 Latex Additive is a specially designed latex additive for use with 211 to make high strength latex thin-set bed up to 3 mm and medium bed up to 15 mm mortars.

STONETECH Epoxy Grout Haze & Coating Stripper is a fast-acting, water-based gel designed to safely remove tough epoxy grout haze and various coatings from vertical and horizontal surfaces.

4237 Latex Additive is a specially designed latex additive for use with 211 to make high strength latex thin-set bed up to 3 mm and medium bed up to 15 mm mortars.

211 Crete Filler Powder is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates.

LATABOND™ is a specially designed latex admixture for use in Portland cement adhesives.

MVIS™ Veneer Mortar is a patented, versatile polymer fortified mortar designed specifically for the installation of adhered masonry veneer, stone and thin brick.

MULTIFLEX Adhesive is an economical, flexible, rubber and polymer fortified cementitious powder-based thin set adhesive for installing ceramic tile and stone to floors and walls.

335 Premium Flexible Adhesive is a high performance thin-bed adhesive for installing a wide range of tiles and stone including low absorption ceramic tile, porcelain tile, natural and manufactured stone using thin-set method of installation.

Multimastic Premium Adhesive is a white, non-flammable, ready to use latex adhesive designed for interior installations of ceramic tile and natural stone on both floors and walls.

PRIME-N-BOND™ is a versatile, ready-to-use, single coat, low VOC primer designed to enhance the adhesion of adhesives to many smooth and non-absorptive substrates that can be difficult to bond to.

The ultimate, sand free, lightweight, polymer fortified, thin-set adhesive for the installation of ceramic, stone and glass tiles.

254 Platinum Adhesive is the ultimate one-step, polymer fortified, thin-set mortar for interior and exterior installation of ceramic tile, stone, quarry tile, pavers and brick.

Multimastic Premium Adhesive is a white, non-flammable, ready to use latex adhesive designed for interior installations of ceramic tile and natural stone on both floors and walls.

LATAPOXY 310 Stone Adhesive is a two component, high strength epoxy adhesive, which is formulated for spot bonding fixing method of tile and stone installations on vertical surfaces.

Ultra X8 Polymer Fortified Flexible Adhesive is a creamy and smooth to trowel thin-set adhesive for installing all types of tile and stone over a wide range of surfaces.

335 RAPID Premium Flexible Adhesive is a high performance thin-bed adhesive for installing a wide range of tiles and stone including low absorption ceramic tile, porcelain tile, natural and manufactured stone using thin-set method of installation.

LATAPOXY 310 Rapid Stone Adhesive is a two component, high strength epoxy adhesive. Engineered, formulated and optimised for the spot bonding fixing method of installing tile and stone on vertical surfaces.

LATAFLEX Gold Adhesive is a superior performance polymer fortified, rubber reinforeced thin-set adhesive for installing ceramic tile and stone using the thin-bed method of installation

101 Rapid Latex Admix is a rapid setting, latex admixture for thin set mortars, cement grouts and cement mortar beds.

211 Crete Filler Powder is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates.

LATACOUSTIC 5mm Sound Control is a composite of recycled rubber particles and other selected sound attenuating granules to form a high density acoustical control mat is available in varying thickness to aid in sound transmission reduction in tiled and other types of internal floor installations.

LATACOUSTIC 3mm Sound Control is a composite of recycled rubber particles and other selected sound attenuating granules to form a high density acoustical control mat is available in varying thickness to aid in sound transmission reduction in tiled and other types of internal floor installations.

335 Premium Flexible Adhesive is a high performance thin-bed adhesive for installing a wide range of tiles and stone including low absorption ceramic tile, porcelain tile, natural and manufactured stone using thin-set method of installation.

211 Crete Filler Powder is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates.

315 Super Floor & Wall Adhesive (Previously 290 Super Floor & Wall Thin-Set Adhesive) is a high performance thin-set adhesive to install tile and stone using the thin-bed method of installation. Mix with water or fortify with LATICRETE latex admixture.

335 LITE is a premium, sand free, lightweight, high performance thin-set adhesive for the installation of large format ceramic, porcelain & stone tile.

GenieMat RST reduced sound transmission mat is a high performance acoustical underlayment that is engineered to reduce impact noise through ceramic tiles, stone and other hard surface materials.

Epistrip Ultra Clean is a simple and effective chemical for the removal of excess epoxy from tiles, flooring or other surfaces.

GenieMat RST reduced sound transmission mat is a high performance acoustical underlayment that is engineered to reduce impact noise through ceramic tiles, stone and other hard surface materials.

STONETECH Epoxy Grout Haze & Coating Stripper is a fast-acting, water-based gel designed to safely remove tough epoxy grout haze and various coatings from vertical and horizontal surfaces.

335 RAPID Premium Flexible Adhesive is a high performance thin-bed adhesive for installing a wide range of tiles and stone including low absorption ceramic tile, porcelain tile, natural and manufactured stone using thin-set method of installation.

STRATA_MAT™ is a next generation high performance uncoupling mat for use under ceramic tile and stone installations, for both residential and commercial applications.

335 Premium Flexible Adhesive is a high performance thin-bed adhesive for installing a wide range of tiles and stone including low absorption ceramic tile, porcelain tile, natural and manufactured stone using thin-set method of installation.

Ultra X8 Polymer Fortified Flexible Adhesive is a creamy and smooth to trowel thin-set adhesive for installing all types of tile and stone over a wide range of surfaces.

315 Super Floor & Wall Adhesive (Previously 290 Super Floor & Wall Thin-Set Adhesive) is a high performance thin-set adhesive to install tile and stone using the thin-bed method of installation. Mix with water or fortify with LATICRETE latex admixture.

335 RAPID Premium Flexible Adhesive is a high performance thin-bed adhesive for installing a wide range of tiles and stone including low absorption ceramic tile, porcelain tile, natural and manufactured stone using thin-set method of installation.

MULTIFLEX Adhesive is an economical, flexible, rubber and polymer fortified cementitious powder-based thin set adhesive for installing ceramic tile and stone to floors and walls.

LATAPOXY 310 Stone Adhesive is a two component, high strength epoxy adhesive, which is formulated for spot bonding fixing method of tile and stone installations on vertical surfaces.

STONETECH Epoxy Grout Haze & Coating Stripper is a fast-acting, water-based gel designed to safely remove tough epoxy grout haze and various coatings from vertical and horizontal surfaces.