Waterproofing

GC All Purpose High Strength Adhesive Gripset GC All Purpose Adhesive is a high performance, single part waterproof bedding compound used for fixing any of the GC sheet membranes. Based on silane modified polymer technology, GC All Purpose adhesive possesses outstanding adhesion and...

Omniflex is a hydrophobic non-woven polypropylene fleece laminated to a grey pressure sensitive butyl adhesive, supplied on a pre-slit extended filmic release liner. Designed to create permanent visco-elastic seals on the wall/floor interface and around drainage apertures in walls and floors....

A premixed, one-pack, water-based, microfibre reinforced acrylic, flexible, waterproofing membrane.

ARDEX WPM 300 is a two component water based epoxy polyamide membrane/barrier coating.

Garden Tanking Membrane

Remedial Membranes – Clear Waterproofing Membrane is a two part clear, hybrid water based, aliphatic polyurethane waterproofing membrane / coating which cures to form a clear, tough, durable, flexible, trafficable, abrasion and anti-scratch resistant, waterproof membrane in a clear gloss finish....

WB2K is a two component waterborne epoxy sealer that combines the excellent adhesion and toughness of epoxy resins with the advantages of using water as a carrier.

Mapeproof Turbo 1k 10kg Polyurethane Membrane ⠀ DESCRIPTION One component, solvent-free moisture curing and rapid drying polyurethane surface membrane with a very low emission of volatile organic compounds. Moisture vapour barrier for cement-based substrates that are not subject to rising...

Membryl® is a waterborne elastomeric waterproofing membrane with outstanding long-term UV stability.

A clear solvent-based primer designed to seal and improve the adhesion of dense or highly porous substrates.

ARDEX WPM 157 is a one component moisture cured polyurethane system for waterproofing planter box internals, roof and deck areas (that are to be paved or covered) and landscaped decks.

Roofing and Tanking Membrane.

Bostik Seal N' Flex 1 is a low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough and flexible seal capable of cyclic expansion and compression movement of 100% (+ 50%) of the original installed joint width.

ARDEX WPM 300 is a two component water based epoxy polyamide membrane/barrier coating.

Deckweb is a basic polyester reinforcing tape for use with most water based membranes.

ARDEX WPM 300 is a two component water based epoxy polyamide membrane/barrier coating.

Fully compliant Class III waterproof membrane that is easy to install, UV stable and compatible with all good quality tile adhesives. It is fast drying and rain safe in approx. 2 hours at 21°C.

4mm APP Modified Bituminous Torch Applied Waterproofing Membrane with Mineralised Surface.

Butynol Seam Primer Prior to Tape Application.

Bostik Seal N' Flex 1 is a low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough and flexible seal capable of cyclic expansion and compression movement of 100% (+ 50%) of the original installed joint width.