Waterproofing

AQUABLOK BT is a single component, liquid applied, coaltar free, bitumen modified, coal, tar free, moisture cured polyurethane waterproofing membrane designed to form a permanently flexible seamless waterproofing membrane that is impervious to moisture.

Cemproof Plug is a quick-setting cement based mortar that instantly stops running water from cracks, fissures, holes or other openings in concrete and masonry.

Cemproof Ultra Flex-300 is a two component, flexible cementitious waterproofing membrane formulated for use in positive side waterproofing applications.

Acrylic Modifier represents a new generation of cement modifiers, developed to improve the physical properties of cement mortars and to produce exceptional performance in cement renders. It improves the chemical, corrosion, moisture and salt water resistance of cement renders.

Davco K10 Plus A flexible, 1 part, ready to use, water based polyurethane Class III waterproofing membrane available in green or grey. Suitable for interior and exterior applications. Commercial and domestic walls and floors. Features & Benefits Ready to use straight from the pail...

Nanodefense EcoNanodefense® Eco develops total water-resistance under positive thrust guaranteeing the protection of absorbent substrates or those subject to damp, or in constantly humid environments. Internal application only.

Roberts 3 Piece Set Rollers 230

HYDRO BAN SLURRY is a cement based, one component, polymer fortified, waterproofing material that mixes with water and easily applies with brush, roller or trowel.

Bostik Seal N' Flex 1 is a low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough and flexible seal capable of cyclic expansion and compression movement of 100% (+ 50%) of the original installed joint width.

Fabric Bandage 140mm X 100m

Pabkote 5 provides a quick and economical means of applying a heavy bitumen protective coating to most building surfaces.

100% stitch-bonded, polyester reinforcing fabric that offers a combination of high strength tensile properties, while also providing good elongation movement of the accompanying membrane for an overall excellent resistance to thermal stresses.

TREMproof 3300 HD is a self-adhesive, SBS based bituminous waterproofing membrane that is self-protected with a high-density polypropylene (HDPE) facer.

Saltwater Paragranular is a premium, high swelling, hydrophilic, granular, sodium bentonite. When in the presence of water, Saltwater Paragranular reacts and forms an impervious waterproof gel.

Paraseal Paraterm bar is an aluminium alloy especially formulated to exhibit excellent holding power. The high strength assures bowless installation when installed per the pre-drilled holes.

Tremco Water-Stop is a composite water stop comprised of expandable, granular bentonite. When water comes into direct contact with Tremco Water-Stop, the bentonite clay expands to form an impenetrable barrier which creates a gasket and mitigates further water ingress.

TREMproof 200EC is a two-component water based epoxy primer designed to act as a vapour retarder on porous substrates, to minimise vapour drive into liquid applied waterproofing membranes.

One-Part, Low Odour, Rapid Curing Interlaminary Primer for Tremco Polyurethane Products

Tremco Vulkem 350NF-R Grey 18.9 Litres Base Coat

Tremco Vulkem 346 Grey 18.9 Litres Top Coat