Waterproofing

Polyroof LV is a single-component, roof elastomer mastic formulated to ensure elasticity, weather resistance, and durability with ease of application.

TREMproof 3300 HD is a self-adhesive, SBS based bituminous waterproofing membrane that is self-protected with a high-density polypropylene (HDPE) facer.

Paraseal LG is a multi-layer sheet membrane waterproofing system consisting of a self-sealing, expandable layer of bentonite laminated to an impermeable, high density polyethylene (HDPE).

Specialty Formulated Dual Layer Sheet Waterproofing Membrane to Provide Superior Protection to Below Grade Structures Against the Presence of Brackish Water

Saltwater Paragranular is a premium, high swelling, hydrophilic, granular, sodium bentonite. When in the presence of water, Saltwater Paragranular reacts and forms an impervious waterproof gel.

Paraseal Paramastic is a sodium bentonite filled, bitumen based mastic for use with Paraseal waterproofing membranes.

Paraseal Paraterm bar is an aluminium alloy especially formulated to exhibit excellent holding power. The high strength assures bowless installation when installed per the pre-drilled holes.

Paraseal Permanent Seam Tape is a 1.5 mm thick, rubberized SBS bitumen membrane laminated to a polyethylene reinforcing film.

Tremco Water-Stop is a composite water stop comprised of expandable, granular bentonite. When water comes into direct contact with Tremco Water-Stop, the bentonite clay expands to form an impenetrable barrier which creates a gasket and mitigates further water ingress.

Tremco Water-Stop is a composite water stop comprised of expandable, granular bentonite. When water comes into direct contact with Tremco Water-Stop, the bentonite clay expands to form an impenetrable barrier which creates a gasket and mitigates further water ingress.

TREMproof 200EC is a two-component water based epoxy primer designed to act as a vapour retarder on porous substrates, to minimise vapour drive into liquid applied waterproofing membranes.

Vulkem 171 primer is a quick-drying, one-part, moisture-curing primer that enhances adhesion to concrete, plywood and other porous substrates where Vulkem urethane sealants, membranes or coatings will be applied.

One-Part, Low Odour, Rapid Curing Interlaminary Primer for Tremco Polyurethane Products

One-Part, Low Odour, Rapid Curing Interlaminary Primer for Tremco Polyurethane Products

TREMprime non-porous primer is a one-part primer, used on metal or plastic substrates to enhance the adhesion of all Tremco polyurethane sealants and membranes.

TREMprime non-porous primer is a one-part primer, used on metal or plastic substrates to enhance the adhesion of all Tremco polyurethane sealants and membranes.

SG010 is a primer designed to enhance the adhesion of single or two-component silicone on metal substrates and plastics.

Water Based Primer used with AlphaGuard Roofing System

TREMproof 90 WB primer is a single-component, waterbourne, acrylic primer designed to act as an adhesion promoting primer and to minimize absorption of the TREMproof 90 into porous surfaces and prevent “green cracking” and other inconsistencies in the waterproof membrane.

Bitumen Primer for TREMproof TORCH Systems