Waterproofing

DuraCore's Moisture Proof is a liquid moisture barrier and densifier for new or old concrete that requires no mixing and is applied simply by pouring & spreading or spraying with a pump up spray pack. A soft broom is required for an even application and to spread out any puddled areas. Moisture...

MAXSEAL FOUNDATION MAXSEAL FOUNDATION ⠀is a cement based product which, together with special additives and selected aggregates gives it waterproofing characteristics, whether the foundations are in concrete or masonry. It gives great protection to foundation concrete thanks to its high...

SikaTite Moisture Seal 2K is for priming of interior concrete substrates and screeds with high moisture levels. Ready to use. Easy to apply. Rapid cure time.

MAXPLUG is a quick-setting cement-based mortar that instantly stops running water from cracks, fissures, holes or other openings in concrete and masonry.

ARDEX WPM 310 is a tough, UV stable flexible premixed liquid applied waterproofing membrane.

DuraCore's Moisture Proof is a liquid moisture barrier and densifier for new or old concrete that requires no mixing and is applied simply by pouring & spreading or spraying with a pump up spray pack. A soft broom is required for an even application and to spread out any puddled areas....

Tremco Vulkem 951NF Grey 17.4 Litre Kite Two Part Top Coat

Acrylic Modifier represents a new generation of cement modifiers, developed to improve the physical properties of cement mortars and to produce exceptional performance in cement renders. It improves the chemical, corrosion, moisture and salt water resistance of cement renders.

Powerflex® is a rubber polymer cement additive developed to improve the strength, adhesion, and chemical/moisture resistance of cement screeds, mortars and renders.

DTA Paint Brush 100mm 100mm economy paint brush. Ideal for applying sealers and waterproofing agents.

⠀ MAXSEAL FLEX MAXSEAL FLEX ⠀is a two-component product. Component A is a water-based special acrylic resin and component B, is a mortar based on a mixture of special cements, additives and well-graded aggregates. Once applied and cured, ⠀MAXSEAL® FLEX⠀ provides a non-toxic, flexible and...

SikaTite® UnderTile is a fast curing, single component, class 3 waterproofing membrane. Water based synthetic rubber waterproofing membrane for under-tile, and protected applications.

⠀ MAXSEAL FLEX MAXSEAL FLEX ⠀is a two-component product. Component A is a water-based special acrylic resin and component B, is a mortar based on a mixture of special cements, additives and well-graded aggregates. Once applied and cured, ⠀MAXSEAL® FLEX⠀ provides a non-toxic, flexible and...

Fabric Bandage 100mm X 50m

Tremco Water-Stop is a composite water stop comprised of expandable, granular bentonite. When water comes into direct contact with Tremco Water-Stop, the bentonite clay expands to form an impenetrable barrier which creates a gasket and mitigates further water ingress.

The high-quality covers made of brushed stainless steel complete the design aspirations of the wedi Fundo Riolito neo floor elements.

Multithane Std is a single pack, liquid applied, moisture curing, self-levelling, waterproofing membrane which cures to form a seamless, tough, durable, elastomeric (class 3 ) waterproofing membrane.

AQUABLOK WPU is formulated on water based polyurethane polymer technology. The cured membrane is a class 3 with high flexibility. WPU is a premixed, single component, elastomeric waterproofing membrane for use in internal and external applications and under tiled finishes including shower recesses, bathrooms, laundries, decks, balconies, podiums and rooftops. WPU is water based with low VOCs and forms a flexible, seamless waterproofing membrane. It bonds to a wide variety of substrates and is UV stable and may be left exposed. WPU may be recoated in 4 hours, tiled over after 48 hours and can be flood tested 72 hours after the final application. WPU contains micro fibre reinforcement which provides excellent tensile strength and elongation.

Bitumen Primer for TREMproof TORCH Systems

Tremco Vulkem 350SL Grey 18.9 Litres Base Coat