Waterproofing

100% stitch-bonded, polyester reinforcing fabric that offers a combination of high strength tensile properties, while also providing good elongation movement of the accompanying membrane for an overall excellent resistance to thermal stresses.

Paraseal Permanent Seam Tape is a 1.5 mm thick, rubberized SBS bitumen membrane laminated to a polyethylene reinforcing film.

Heavy Grade Hydroseal is a thick, inert fibre reinforced solvent cut bituminous mastic.

Protection sheeting is a puncture resistant plastic product used predominantly to protect below ground waterproofing membranes from back fill and root growth.

The high-quality covers made of brushed stainless steel complete the design aspirations of the wedi Fundo Riolito neo floor elements.

ARDEX WPM 300 is a two component water based epoxy polyamide membrane/barrier coating.

Polyfab is a non woven, rot proof polyester fabric for use in conjunction with liquid waterproofing membranes. It is easier to wet out and it possesses superior flexibility to materials such as fibreglass.

MAXPLUG is a quick-setting cement-based mortar that instantly stops running water from cracks, fissures, holes or other openings in concrete and masonry.

WeldTec Internal Undertile Waterproofing Membrane

Fabric Bandage 125mm X 200m

Bostik Seal N' Flex 1 is a low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough and flexible seal capable of cyclic expansion and compression movement of 100% (+ 50%) of the original installed joint width.

MAXPLUG is a quick-setting cement-based mortar that instantly stops running water from cracks, fissures, holes or other openings in concrete and masonry.

SikaTite WPU is a fast curing, UV stable, single component, class 3 waterproofing membrane. Water based modified polyurethane waterproofing membrane for under-tile, and protected applications.

⠀ MAXSEAL FLEX MAXSEAL FLEX ⠀is a two-component product. Component A is a water-based special acrylic resin and component B, is a mortar based on a mixture of special cements, additives and well-graded aggregates. Once applied and cured, ⠀MAXSEAL® FLEX⠀ provides a non-toxic, flexible and...

DuraCore's Moisture Proof is a liquid moisture barrier and densifier for new or old concrete that requires no mixing and is applied simply by pouring & spreading or spraying with a pump up spray pack. A soft broom is required for an even application and to spread out any puddled areas. Moisture...

SikaTite 2-Part is a fast curing, two component, class 2 waterproofing membrane.