Waterproofing

Specialty Formulated Dual Layer Sheet Waterproofing Membrane to Provide Superior Protection to Below Grade Structures Against the Presence of Brackish Water

Paraseal Paramastic is a sodium bentonite filled, bitumen based mastic for use with Paraseal waterproofing membranes.

Paraseal Permanent Seam Tape is a 1.5 mm thick, rubberized SBS bitumen membrane laminated to a polyethylene reinforcing film.

Tremco Water-Stop is a composite water stop comprised of expandable, granular bentonite. When water comes into direct contact with Tremco Water-Stop, the bentonite clay expands to form an impenetrable barrier which creates a gasket and mitigates further water ingress.

One-Part, Low Odour, Rapid Curing Interlaminary Primer for Tremco Polyurethane Products

TREMprime non-porous primer is a one-part primer, used on metal or plastic substrates to enhance the adhesion of all Tremco polyurethane sealants and membranes.

TREMprime non-porous primer is a one-part primer, used on metal or plastic substrates to enhance the adhesion of all Tremco polyurethane sealants and membranes.

SG010 is a primer designed to enhance the adhesion of single or two-component silicone on metal substrates and plastics.

Water Based Primer used with AlphaGuard Roofing System

TREMproof 90 WB primer is a single-component, waterbourne, acrylic primer designed to act as an adhesion promoting primer and to minimize absorption of the TREMproof 90 into porous surfaces and prevent “green cracking” and other inconsistencies in the waterproof membrane.

Two Component, Epoxy Primer and Incompatibility Barrier

TREMproof Contact Adhesive has been developed to provide an adhesive bond for self-adhesive waterproof membranes (TREMproof 3300HD) as well as TREMproof Torch Fleece membranes.

Tremco Vulkem 350R Grey 15 Litres Base Coat

Tremco Vulkem 350SL Grey 18.9 Litres Base Coat

Tremco Vulkem 360NF Grey 18.9 Litres Base Coat

Tremco Vulkem 346 Slate Grey 18.9 Litres Top Coat

Tremco Vulkem 951NF Slate Grey 17.4 Litre Kite Two Part Top Coat

DualFlex is a reinforcing flashing that consists of a central strip of stretchy SEBS rubber flanked on either side by an absorbent non-woven felt.

TREMcrete NWP is a unique brushable penetrative fine cementitious coating specially designed for waterproofing and protection of old and new concrete against positive and negative water pressure.

ARDEX WPM 368 is a single component acrylic copolymer membrane that will prevent rising damp, efflorescence and will resist negative hydrostatic pressure.