Waterproofing

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift.

Pond Sealer Colours is a seamless membrane, designed for waterproofing new or renovated fish ponds and water features.

WB2K is a two component waterborne epoxy sealer that combines the excellent adhesion and toughness of epoxy resins with the advantages of using water as a carrier.

Rubber tape sandwiched between two layers of non-woven fabric to form elastic joints in waterproofing systems.

Information ARDEX Multiprime ARDEX Multiprime is a water-based primer for improving adhesion of ARDEX products to various porous substrates. Water-based – no solvent hazard Quick drying Improves adhesion Substrates: Fibre-cement sheet Concrete, render, screeds Masonry and lightweight...

Pond Sealer Colours is a seamless membrane, designed for waterproofing new or renovated fish ponds and water features.

TREMproof RT Plus is primarily used for internal tanking and waterproofing of concrete. It is a two component, acrylic modified cementitious coating that can be fully immersed, (i.e. water tanks).

HYDRO BAN Fillet & Sealant is a one component, fast curing, hybrid elastomeric adhesive and sealant.

Sika Plug is a chloride free, ready for use powder based on high alumina cement. When mixed with water, it becomes a powerful, fast setting waterplug.

AQUABLOK SBR is a waterborne flexible waterproof membrane designed for use under tiled finishes that is capable of accommodating expected structural movement.

Bostik Seal N' Flex 1 is a low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough and flexible seal capable of cyclic expansion and compression movement of 100% (+ 50%) of the original installed joint width.

Wetite® Rapid is a high solids, class III membrane, modified to deliver rapid drying and 300%+ elongation.

Fabric Bandage 100mm X 50m

Aus-Bond Primer, Grout & Mortar Admix Aus-Bond Primer, Grout and Mortar Latex Admix is a specially formulated, self-crosslinking latex acrylic additive for use as a primer for porous substrates prior to waterproofing, tiling or applying self-levelling mortars. Aus-Bond Primer, Grout and...

Pond Sealer Colours is a seamless membrane, designed for waterproofing new or renovated fish ponds and water features.

Sikalastic®-1K is a one component, flexible, fibre-reinforced mortar, based on cement modified with special alkali-resistant polymers. It also contains fine fillers, selected graded aggregates, plus special waterproofing additives to produce a flexible mortar that is ideal for waterproofing surfaces subject to flexural strain.

Ardex Protection Board Fluted Polyethylene Board ARDEX Protection Board is a fluted polyethylene board designed to be used after the membrane installation and prior to backfilling to protect the membrane from mechanical damage during the backfilling operation. Size: 1,830 X 1,220mm fluted...

LATAPOXY Moisture Shield is a 2 component, roller applied epoxy coating specifically designed to reduce moisture vapour emissions in concrete and other substrates

Fastfix Wet Shield One Coat Instant Waterproofing Fastfix Wet Shield is a resin based, fiber re-enforced roof repair compound, which is effective on all common roofing surfaces. It creates an instant roof repair, even in wet weather conditions and on wet surfaces. Fastfix Wet Shield is...

Solvent-free, low odour acrylic primer in water dispersion with very low emission of volatile organic compounds (VOC)

ARDEX WPM 405 is an SBR, multipurpose, concentrated liquid polymer additive which when used with sand/cement greatly improves the bond strength and flexibility.

HYDRO BAN SLURRY is a cement based, one component, polymer fortified, waterproofing material that mixes with water and easily applies with brush, roller or trowel.

Elastoseal®TR is a high performance synthetic rubber-based membrane, designed to offer waterproofing to areas subjected to permanent immersion and internal pedestrian traffic.

One component water-based polyurethane, Class 3 waterproofing membrane system that meets the requirements of AS3740 by complying with AS/NZ 4858.

Polyfab BB is a 100mm wide self-adhesive non-woven polyester fabric. It incorporates a self-adhesive portion (central 1/3 of tape) that acts as a bond-breaker over joints, cracks or other areas of movement.

Elastoproof Base Collars Elastic Seal for Pipes and Penetrations Ensures effective detailing and enhanced sealing around penetrations such as pipes, drainage outlets, cabling and any substrate fixtures by protecting against movement, vibration and cracking. Permanent elastic collar...

Membryl® is a waterborne elastomeric waterproofing membrane with outstanding long-term UV stability.

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

Gripset Xpress SP Rapid Set Primer Gripset Xpress SP is a solvent free primer specifically developed with adhesion enhancing properties for non-porous, dense and smooth substrates. It is designed for use on both wall and floor surfaces, achieving high adhesion without the need for etching...

Ready-to-use quick drying and flexible Class III water-based hybrid polyurethane membrane for internal and external waterproofing applications

HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.

WeldTecTM External Roofing Membrane.

Bostik DAMPFIX BANDAGE Bond Breaker/Bandage Bostik Dampfix® Bandage is a premium reinforcing tape designed to be used with Dampfix waterproofing membranes. It is a high performance bond breaker and joint isolation system. Where to Use Interior surfaces Exterior surfaces...

Fastfix Wet Shield One Coat Instant Waterproofing Fastfix Wet Shield is a resin based, fiber re-enforced roof repair compound, which is effective on all common roofing surfaces. It creates an instant roof repair, even in wet weather conditions and on wet surfaces. Fastfix Wet Shield is...

Two-component solvent-free primer.

Polyfab is a non woven, rot proof polyester fabric for use in conjunction with liquid waterproofing membranes. It is easier to wet out and it possesses superior flexibility to materials such as fibreglass.

3.0mm Plain Bitumen Membrane.

Polyfab is a non woven, rot proof polyester fabric for use in conjunction with liquid waterproofing membranes. It is easier to wet out and it possesses superior flexibility to materials such as fibreglass.

Self-Adhesive Butynol® Tape

WeldTec Internal Undertile Waterproofing Membrane

Ardex WA 98 Butynol Adhesive Specially developed for bonding butyl rubber sheeting to roofing substrates Formulated for optimum performance for spraying Combined with its long tack life, it is ideal for bonding large areas Information ARDEX WA 98 Adhesive Specially formulated...

A red water-based acrylic primer designed to seal porous substrates and enhance the adhesion of subsequent Superflex membranes.

Primer for Bituminous Membranes

Sontara tape is made from a high quality polyester material and can be used with most water based membranes.

ARDEX WPM 908 is a single part acrylic based trafficable membrane.

SikaTite-BE is a water based bitumen emulsion modified with acrylic latex polymers. It can be applied as a waterproof membrane, sealant, protective coating or adhesive. It is designed for use underground, internal and immersed areas.

Fabric Bandage 100mm X 50m

WB2K is a two component waterborne epoxy sealer that combines the excellent adhesion and toughness of epoxy resins with the advantages of using water as a carrier.

Duroproof PUM Pro is a high performance, hand applied, low VOC, moisture-curing single-pack elastomeric polyurethane waterproofing membrane.

HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.

ARDEX WPM 300 is a two component water based epoxy polyamide membrane/barrier coating.

A high quality non-woven polyester material coated with a black butyl rubber adhesive supplied on a siliconised paper liner.

Roofing and Tanking Membrane.

Self-bonding, composite needle-punched sodium bentonite / geotextile waterproofing membrane.

ARDEX WPM 117 (Shelterstick Self-adhesive Membrane) is a self-adhesive bituminous membrane.

Internally waterproof and pre-sloped shower floor base with factory integrated and waterproofed point drain connection for fast track installations that eliminate the many different steps and products involved in traditional mortar bed or semi pre-fabricated sheet – or liquid membrane system installations .

Seal Strip is designed for terminating ARDEX sheet applied waterproofing membranes.

Wetite® Rapid is a high solids, class III membrane, modified to deliver rapid drying and 300%+ elongation.

Fabric Bandage 150mm X 50m

A set of butyl self adhesive collars containing two collars for a tap spindles and another collar for a shower head.

Alkaline Resistant Fiberglass Wall Mesh 165 G/m²

GC All Purpose High Strength Adhesive Gripset GC All Purpose Adhesive is a high performance, single part waterproof bedding compound used for fixing any of the GC sheet membranes. Based on silane modified polymer technology, GC All Purpose adhesive possesses outstanding adhesion and...

High performance, two-component, water based epoxy primer and waterproofing barrier membrane