Waterproofing

SikaProof A is a FPO based fully bonded composite membrane, which incorporates sealant grid and non-woven polypropylene fleece layer.

SikaProof A is a FPO based fully bonded composite membrane, which incorporates sealant grid and non-woven polypropylene fleece layer.

AQUABLOK WPU is formulated on water based polyurethane polymer technology. The cured membrane is a class 3 with high flexibility. WPU is a premixed, single component, elastomeric waterproofing membrane for use in internal and external applications and under tiled finishes including shower recesses, bathrooms, laundries, decks, balconies, podiums and rooftops. WPU is water based with low VOCs and forms a flexible, seamless waterproofing membrane. It bonds to a wide variety of substrates and is UV stable and may be left exposed. WPU may be recoated in 4 hours, tiled over after 48 hours and can be flood tested 72 hours after the final application. WPU contains micro fibre reinforcement which provides excellent tensile strength and elongation.

AQUABLOK BT is a single component, liquid applied, coaltar free, bitumen modified, coal, tar free, moisture cured polyurethane waterproofing membrane designed to form a permanently flexible seamless waterproofing membrane that is impervious to moisture.

Cemproof Plug is a quick-setting cement based mortar that instantly stops running water from cracks, fissures, holes or other openings in concrete and masonry.

Acrylic Modifier represents a new generation of cement modifiers, developed to improve the physical properties of cement mortars and to produce exceptional performance in cement renders. It improves the chemical, corrosion, moisture and salt water resistance of cement renders.

Davco K10 Plus A flexible, 1 part, ready to use, water based polyurethane Class III waterproofing membrane available in green or grey. Suitable for interior and exterior applications. Commercial and domestic walls and floors. Features & Benefits Ready to use straight from the pail...

Nanodefense EcoNanodefense® Eco develops total water-resistance under positive thrust guaranteeing the protection of absorbent substrates or those subject to damp, or in constantly humid environments. Internal application only.

Roberts 3 Piece Set Rollers 230

Bostik Seal N' Flex 1 is a low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough and flexible seal capable of cyclic expansion and compression movement of 100% (+ 50%) of the original installed joint width.

Fabric Bandage 140mm X 100m

Pabkote 5 provides a quick and economical means of applying a heavy bitumen protective coating to most building surfaces.

100% stitch-bonded, polyester reinforcing fabric that offers a combination of high strength tensile properties, while also providing good elongation movement of the accompanying membrane for an overall excellent resistance to thermal stresses.

TREMproof 3300 HD is a self-adhesive, SBS based bituminous waterproofing membrane that is self-protected with a high-density polypropylene (HDPE) facer.

Saltwater Paragranular is a premium, high swelling, hydrophilic, granular, sodium bentonite. When in the presence of water, Saltwater Paragranular reacts and forms an impervious waterproof gel.

Paraseal Paraterm bar is an aluminium alloy especially formulated to exhibit excellent holding power. The high strength assures bowless installation when installed per the pre-drilled holes.

Tremco Water-Stop is a composite water stop comprised of expandable, granular bentonite. When water comes into direct contact with Tremco Water-Stop, the bentonite clay expands to form an impenetrable barrier which creates a gasket and mitigates further water ingress.

TREMproof 200EC is a two-component water based epoxy primer designed to act as a vapour retarder on porous substrates, to minimise vapour drive into liquid applied waterproofing membranes.

One-Part, Low Odour, Rapid Curing Interlaminary Primer for Tremco Polyurethane Products

Tremco Vulkem 350R Grey 15 Litres Base Coat

Tremco Vulkem 350NF-R Grey 18.9 Litres Base Coat

Tremco Vulkem 346 Grey 18.9 Litres Top Coat

ARDEX WPM 157 is a one component moisture cured polyurethane system for waterproofing planter box internals, roof and deck areas (that are to be paved or covered) and landscaped decks.

ARDEX WPM 310 is a tough, UV stable flexible premixed liquid applied waterproofing membrane.

ARDEX WPM 300 is a two component water based epoxy polyamide membrane/barrier coating.

ARDEX Bituminous Roof Sealant is a one component, easy-to-use, UV-stable sealant with bitumen-based solvents.

A clear solvent-based primer designed to seal and improve the adhesion of dense or highly porous substrates.

ARDEX WPM 117 (Shelterstick Self-adhesive Membrane) is a self-adhesive bituminous membrane.

The ARDEX Brass Roller (penny roller) is ideal for use with ARDEX single ply sheet membranes to ensure complete adhesion in corners, seams, and intricate membrane detailing.

The ARDEX Small Handle Roller with a rolling width of 40mm and comfortable wooden handle is ideal for ARDEX single ply sheet membranes.

Paint Brush 50mm

Fabric Bandage 200mm X 50m

Information ARDEX Multiprime ARDEX Multiprime is a water-based primer for improving adhesion of ARDEX products to various porous substrates. Water-based – no solvent hazard Quick drying Improves adhesion Substrates: Fibre-cement sheet Concrete, render, screeds Masonry and lightweight...

Fully compliant Class III waterproof membrane that is easy to install, UV stable and compatible with all good quality tile adhesives. It is fast drying and rain safe in approx. 2 hours at 21°C.

Paint Roller Handle 230mm (frame only)

A HIGHLY FLEXIBLE SEALING TAPE, WITH CORNER OR PIPE PENETRATION COMPONENTS FOR USE IN WATERPROOFING APPLICATIONS

Schonox ST D8 12-24mm Pipe Penetration A HIGHLY FLEXIBLE SEALING TAPE, WITH CORNER OR PIPE PENETRATION COMPONENTS FOR USE IN WATERPROOFING APPLICATIONS A flexible Bond breaker tape, with corner and pipe penetration components for used with waterproofing systems. Schonox ST corners...

The high-quality covers made of brushed stainless steel complete the design aspirations of the wedi Fundo Riolito neo floor elements.

The high-quality covers made of brushed stainless steel complete the design aspirations of the wedi Fundo Riolito neo floor elements.

Thin, crack-bridging sealing sheet made from tear-resistant polyethylene film.

RLA Moisture Seal is a high performance 2 part water based epoxy waterproofing system designed as a water and vapour proof coating under water proofing systems, coatings, tiles, resilient and timber flooring.

Paint Brush 75mm (ATECH)

DTA Paint Brush 100mm 100mm economy paint brush. Ideal for applying sealers and waterproofing agents.

Water-based polyurethane-acrylic hybrid waterproofing membrane developed for high performance undertile waterproofing.

Contact Adhesive for Vinyl Skirting and ARDEX WeldTecTM Membranes

⠀ MAXSEAL FLEX MAXSEAL FLEX ⠀is a two-component product. Component A is a water-based special acrylic resin and component B, is a mortar based on a mixture of special cements, additives and well-graded aggregates. Once applied and cured, ⠀MAXSEAL® FLEX⠀ provides a non-toxic, flexible and...

MAXPLUG is a quick-setting cement-based mortar that instantly stops running water from cracks, fissures, holes or other openings in concrete and masonry.

MAXPLUG is a quick-setting cement-based mortar that instantly stops running water from cracks, fissures, holes or other openings in concrete and masonry.