Waterproofing

DUROTECH ARW is a single component water based primer used to prime concrete, masonry and fibre cement sheeting surfaces.

SWELLTITE Dual Membrane Waterproofing Protection Introduced back in 1987, Swelltite was the first bentonite waterproofing membrane designed for split-slab deck and plaza construction. Swelltite combines the natural waterproofing abilities of Volclay sodium bentonite with a high-strength...

Sikalastic®-1K is a one component, flexible, fibre-reinforced mortar, based on cement modified with special alkali-resistant polymers. It also contains fine fillers, selected graded aggregates, plus special waterproofing additives to produce a flexible mortar that is ideal for waterproofing surfaces subject to flexural strain.

Bostik Seal N' Flex 1 is a low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough and flexible seal capable of cyclic expansion and compression movement of 100% (+ 50%) of the original installed joint width.

RLA WPU is an elastomeric one part polyurethane/Acrylic fibre reinforced water based membrane developed as a high performance internal/ external membrane for most general waterproofing applications.

ARDEX WPM 330 is an extremely weather resistant water based acrylic waterproofing membrane.

Pabkote 3 provides a quick and economical means of applying a heavy bitumen protective coating to most building surfaces.

Ultra fast setting and drying hydraulic binder for plugging water leaks.

AlphaGuard BIO is an extremely high performing composite waterproofing system, designed with a focus on roofing restoration.

ARDEX Dropper Drainage Outlet Formed from butyl rubber these outlets are available in a range of sizes to suit various drainage piping. The outlets are inserted into the pipe, sealed into the pipe with silicone and the Ardex Sheet Membranes are torched or bonded directly onto the outlet...

Specialty Formulated Dual Layer Sheet Waterproofing Membrane to Provide Superior Protection to Below Grade Structures Against the Presence of Brackish Water

Mineral Coated Membrane.

Polyfab is a non woven, rot proof polyester fabric for use in conjunction with liquid waterproofing membranes. It is easier to wet out and it possesses superior flexibility to materials such as fibreglass.

100% stitch-bonded, polyester reinforcing fabric that offers a combination of high strength tensile properties, while also providing good elongation movement of the accompanying membrane for an overall excellent resistance to thermal stresses.

Tremco Vulkem 346 Grey 18.9 Litres Top Coat

ONE-COMPONENT FLEXIBLE WATERPROOF COATING AGAINST POSITIVE AND NEGATIVE PRESSURE FOR CONCRETE AND MASONRY

ARDEX WPM 300 is a two component water based epoxy polyamide membrane/barrier coating.

SikaTite WPU is a fast curing, UV stable, single component, class 3 waterproofing membrane. Water based modified polyurethane waterproofing membrane for under-tile, and protected applications.

Paraseal Permanent Seam Tape is a 1.5 mm thick, rubberized SBS bitumen membrane laminated to a polyethylene reinforcing film.

Heavy Grade Hydroseal is a thick, inert fibre reinforced solvent cut bituminous mastic.

Fabric Bandage 125mm X 200m

WeldTec Internal Undertile Waterproofing Membrane

Protection sheeting is a puncture resistant plastic product used predominantly to protect below ground waterproofing membranes from back fill and root growth.

Bostik Seal N' Flex 1 is a low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough and flexible seal capable of cyclic expansion and compression movement of 100% (+ 50%) of the original installed joint width.

SikaTite 2-Part is a fast curing, two component, class 2 waterproofing membrane.

Tremco Vulkem 346 Slate Grey 18.9 Litres Top Coat

Polyroof LV is a single-component, roof elastomer mastic formulated to ensure elasticity, weather resistance, and durability with ease of application.

MAXPLUG is a quick-setting cement-based mortar that instantly stops running water from cracks, fissures, holes or other openings in concrete and masonry.

Paint Brush 100mm

MAXSEAL FOUNDATION MAXSEAL FOUNDATION ⠀is a cement based product which, together with special additives and selected aggregates gives it waterproofing characteristics, whether the foundations are in concrete or masonry. It gives great protection to foundation concrete thanks to its high...

SikaTite Moisture Seal 2K is for priming of interior concrete substrates and screeds with high moisture levels. Ready to use. Easy to apply. Rapid cure time.

Paraseal Paramastic is a sodium bentonite filled, bitumen based mastic for use with Paraseal waterproofing membranes.

DuraCore's Moisture Proof is a liquid moisture barrier and densifier for new or old concrete that requires no mixing and is applied simply by pouring & spreading or spraying with a pump up spray pack. A soft broom is required for an even application and to spread out any puddled areas. Moisture...

Expanding Waterstops for Concrete Construction Joints.

MAXPLUG is a quick-setting cement-based mortar that instantly stops running water from cracks, fissures, holes or other openings in concrete and masonry.

DTA Paint Brush 100mm 100mm economy paint brush. Ideal for applying sealers and waterproofing agents.

Tremco Vulkem 951NF Grey 17.4 Litre Kite Two Part Top Coat

DuraCore's Moisture Proof is a liquid moisture barrier and densifier for new or old concrete that requires no mixing and is applied simply by pouring & spreading or spraying with a pump up spray pack. A soft broom is required for an even application and to spread out any puddled areas....

Powerflex® is a rubber polymer cement additive developed to improve the strength, adhesion, and chemical/moisture resistance of cement screeds, mortars and renders.

Acrylic Modifier represents a new generation of cement modifiers, developed to improve the physical properties of cement mortars and to produce exceptional performance in cement renders. It improves the chemical, corrosion, moisture and salt water resistance of cement renders.

ARDEX WPM 310 is a tough, UV stable flexible premixed liquid applied waterproofing membrane.

Thin, crack-bridging sealing sheet made from tear-resistant polyethylene film.

SikaTite® UnderTile is a fast curing, single component, class 3 waterproofing membrane. Water based synthetic rubber waterproofing membrane for under-tile, and protected applications.

Tremco Water-Stop is a composite water stop comprised of expandable, granular bentonite. When water comes into direct contact with Tremco Water-Stop, the bentonite clay expands to form an impenetrable barrier which creates a gasket and mitigates further water ingress.

Fabric Bandage 100mm X 50m

AQUABLOK WPU is formulated on water based polyurethane polymer technology. The cured membrane is a class 3 with high flexibility. WPU is a premixed, single component, elastomeric waterproofing membrane for use in internal and external applications and under tiled finishes including shower recesses, bathrooms, laundries, decks, balconies, podiums and rooftops. WPU is water based with low VOCs and forms a flexible, seamless waterproofing membrane. It bonds to a wide variety of substrates and is UV stable and may be left exposed. WPU may be recoated in 4 hours, tiled over after 48 hours and can be flood tested 72 hours after the final application. WPU contains micro fibre reinforcement which provides excellent tensile strength and elongation.

⠀ MAXSEAL FLEX MAXSEAL FLEX ⠀is a two-component product. Component A is a water-based special acrylic resin and component B, is a mortar based on a mixture of special cements, additives and well-graded aggregates. Once applied and cured, ⠀MAXSEAL® FLEX⠀ provides a non-toxic, flexible and...

⠀ MAXSEAL FLEX MAXSEAL FLEX ⠀is a two-component product. Component A is a water-based special acrylic resin and component B, is a mortar based on a mixture of special cements, additives and well-graded aggregates. Once applied and cured, ⠀MAXSEAL® FLEX⠀ provides a non-toxic, flexible and...