Waterproofing

Aus-Bond Primer, Grout & Mortar Admix Aus-Bond Primer, Grout and Mortar Latex Admix is a specially formulated, self-crosslinking latex acrylic additive for use as a primer for porous substrates prior to waterproofing, tiling or applying self-levelling mortars. Aus-Bond Primer, Grout and...

Ardex Protection Board Fluted Polyethylene Board ARDEX Protection Board is a fluted polyethylene board designed to be used after the membrane installation and prior to backfilling to protect the membrane from mechanical damage during the backfilling operation. Size: 1,830 X 1,220mm fluted...

Pond Sealer Colours is a seamless membrane, designed for waterproofing new or renovated fish ponds and water features.

Sikalastic®-1K is a one component, flexible, fibre-reinforced mortar, based on cement modified with special alkali-resistant polymers. It also contains fine fillers, selected graded aggregates, plus special waterproofing additives to produce a flexible mortar that is ideal for waterproofing surfaces subject to flexural strain.

Bostik Seal N' Flex 1 is a low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough and flexible seal capable of cyclic expansion and compression movement of 100% (+ 50%) of the original installed joint width.

HYDRO BAN SLURRY is a cement based, one component, polymer fortified, waterproofing material that mixes with water and easily applies with brush, roller or trowel.

ARDEX WPM 405 is an SBR, multipurpose, concentrated liquid polymer additive which when used with sand/cement greatly improves the bond strength and flexibility.

LATAPOXY Moisture Shield is a 2 component, roller applied epoxy coating specifically designed to reduce moisture vapour emissions in concrete and other substrates

Solvent-free, low odour acrylic primer in water dispersion with very low emission of volatile organic compounds (VOC)

Elastoseal®TR is a high performance synthetic rubber-based membrane, designed to offer waterproofing to areas subjected to permanent immersion and internal pedestrian traffic.

One component water-based polyurethane, Class 3 waterproofing membrane system that meets the requirements of AS3740 by complying with AS/NZ 4858.

Polyfab BB is a 100mm wide self-adhesive non-woven polyester fabric. It incorporates a self-adhesive portion (central 1/3 of tape) that acts as a bond-breaker over joints, cracks or other areas of movement.

Elastoproof Base Collars Elastic Seal for Pipes and Penetrations Ensures effective detailing and enhanced sealing around penetrations such as pipes, drainage outlets, cabling and any substrate fixtures by protecting against movement, vibration and cracking. Permanent elastic collar...

Membryl® is a waterborne elastomeric waterproofing membrane with outstanding long-term UV stability.

Fastfix Wet Shield One Coat Instant Waterproofing Fastfix Wet Shield is a resin based, fiber re-enforced roof repair compound, which is effective on all common roofing surfaces. It creates an instant roof repair, even in wet weather conditions and on wet surfaces. Fastfix Wet Shield is...

Gripset Xpress SP Rapid Set Primer Gripset Xpress SP is a solvent free primer specifically developed with adhesion enhancing properties for non-porous, dense and smooth substrates. It is designed for use on both wall and floor surfaces, achieving high adhesion without the need for etching...

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

WeldTecTM External Roofing Membrane.

Ready-to-use quick drying and flexible Class III water-based hybrid polyurethane membrane for internal and external waterproofing applications

HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.