Waterproofing

Paraseal Permanent Seam Tape is a 1.5 mm thick, rubberized SBS bitumen membrane laminated to a polyethylene reinforcing film.

Fabric Bandage 125mm X 200m

wedi's Fundo Riolito Neo System feature the only fully sealed and factory integrated waterproof drain assembly available in the market of customizable shower floor systems with linear drainage.

Heavy Grade Hydroseal is a thick, inert fibre reinforced solvent cut bituminous mastic.

Protection sheeting is a puncture resistant plastic product used predominantly to protect below ground waterproofing membranes from back fill and root growth.

Tremco Vulkem 346 Grey 18.9 Litres Top Coat

ONE-COMPONENT FLEXIBLE WATERPROOF COATING AGAINST POSITIVE AND NEGATIVE PRESSURE FOR CONCRETE AND MASONRY

ARDEX WPM 300 is a two component water based epoxy polyamide membrane/barrier coating.

100% stitch-bonded, polyester reinforcing fabric that offers a combination of high strength tensile properties, while also providing good elongation movement of the accompanying membrane for an overall excellent resistance to thermal stresses.

Polyfab is a non woven, rot proof polyester fabric for use in conjunction with liquid waterproofing membranes. It is easier to wet out and it possesses superior flexibility to materials such as fibreglass.

Thin, crack-bridging sealing sheet made from tear-resistant polyethylene film.

Mineral Coated Membrane.

Specialty Formulated Dual Layer Sheet Waterproofing Membrane to Provide Superior Protection to Below Grade Structures Against the Presence of Brackish Water

ARDEX Dropper Drainage Outlet Formed from butyl rubber these outlets are available in a range of sizes to suit various drainage piping. The outlets are inserted into the pipe, sealed into the pipe with silicone and the Ardex Sheet Membranes are torched or bonded directly onto the outlet...

Bostik Seal N' Flex 1 is a low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough and flexible seal capable of cyclic expansion and compression movement of 100% (+ 50%) of the original installed joint width.

Pabkote 3 provides a quick and economical means of applying a heavy bitumen protective coating to most building surfaces.

ARDEX WPM 330 is an extremely weather resistant water based acrylic waterproofing membrane.

Ultra fast setting and drying hydraulic binder for plugging water leaks.

AlphaGuard BIO is an extremely high performing composite waterproofing system, designed with a focus on roofing restoration.

SWELLTITE Dual Membrane Waterproofing Protection Introduced back in 1987, Swelltite was the first bentonite waterproofing membrane designed for split-slab deck and plaza construction. Swelltite combines the natural waterproofing abilities of Volclay sodium bentonite with a high-strength...

RLA WPU is an elastomeric one part polyurethane/Acrylic fibre reinforced water based membrane developed as a high performance internal/ external membrane for most general waterproofing applications.

Acrylic Modifier represents a new generation of cement modifiers, developed to improve the physical properties of cement mortars and to produce exceptional performance in cement renders. It improves the chemical, corrosion, moisture and salt water resistance of cement renders.

AQUABLOK BT is a single component, liquid applied, coaltar free, bitumen modified, coal, tar free, moisture cured polyurethane waterproofing membrane designed to form a permanently flexible seamless waterproofing membrane that is impervious to moisture.

Hyperband Small Collars are used with waterproofing systems to enhance the sealing of substrate junctions, movement joints, cracks and various other areas subject to potential movement. Hyperband Rubberised Joint Band is especially useful for the reinforcing of waterproofing membranes in highly...

Sikalastic®-1K is a one component, flexible, fibre-reinforced mortar, based on cement modified with special alkali-resistant polymers. It also contains fine fillers, selected graded aggregates, plus special waterproofing additives to produce a flexible mortar that is ideal for waterproofing surfaces subject to flexural strain.

Catalyst PWC is a biochemical modified silicate solution that provides long-term waterproofing and durability benefits to concrete.

DUROTECH ARW is a single component water based primer used to prime concrete, masonry and fibre cement sheeting surfaces.

Drainage Outlet for Walls and Parapets

SikaTite® PU is a fast curing, single component, class 3 waterproofing membrane.

A premixed, one-pack, water-based, microfibre reinforced acrylic, flexible, waterproofing membrane.

2 PART WATERPROOF ADHESIVE DESIGNED FOR FIXING SCHONOX AB SHEET MEMBRANE

Ardex DRS 30/50 DC Very high compressive load carrying capacity of up to 140 tonnes per sq. metre Very high lateral flow capacity Reduces hydrostatic forces upon retaining walls Information ARDEX DRS 30/50 DC ARDEX DRS 30/50 DC provides a perfect solution for sub-soil drainage...