Tremco Waterproofing

Vulkem NEM is a single component, moisture curing, high tensile strength and tough curing polyurethane membrane that has been a market leader in Australia for more than 20 years.

shable Hydroseal is a heavy bituminous, fibre reinforced, rust inhibiting sealing compound, specially designed to be brushed thickly to any surface.

TREMproof 250GC is a rapid curing, high solids, low VOC, moisture cure modified polyurethane waterproofing membrane that can be applied to “Green” (24 hour old) concrete.

New Version: https://www.tradiecart.com.au/tremco-vulkem-nem-plus-grey-15-litres-single-coat-polyurethane-membrane/

shable Hydroseal is a heavy bituminous, fibre reinforced, rust inhibiting sealing compound, specially designed to be brushed thickly to any surface.

shable Hydroseal is a heavy bituminous, fibre reinforced, rust inhibiting sealing compound, specially designed to be brushed thickly to any surface.

TREMproof P85 is a 100% solids, spray applied hybrid polyurea waterproofing membrane that allows for rapid installation, and assists with accelerated construction schedules.

AlphaGuard BIO is an extremely high performing composite waterproofing system, designed with a focus on roofing restoration.

Paraseal LG is a multi-layer sheet membrane waterproofing system consisting of a self-sealing, expandable layer of bentonite laminated to an impermeable, high density polyethylene (HDPE).

TREMproof 3300 HD is a self-adhesive, SBS based bituminous waterproofing membrane that is self-protected with a high-density polypropylene (HDPE) facer.

Pabkote 5 provides a quick and economical means of applying a heavy bitumen protective coating to most building surfaces.

Heavy Grade Hydroseal is a thick, inert fibre reinforced solvent cut bituminous mastic.

3mm APP Modified Bituminous Torch Applied Waterproofing Membrane.

Vulkem H2 Plus is a single component, rapid cure, modified acrylic waterproofing membrane, incorporating micro fibres to increase strength and wet film thickness.

TREMproof RT Plus is primarily used for internal tanking and waterproofing of concrete. It is a two component, acrylic modified cementitious coating that can be fully immersed, (i.e. water tanks).

TREMproof 200EC is a two-component water based epoxy primer designed to act as a vapour retarder on porous substrates, to minimise vapour drive into liquid applied waterproofing membranes.

Pabkote 3 provides a quick and economical means of applying a heavy bitumen protective coating to most building surfaces.

4mm APP Modified Bituminous Torch Applied Waterproofing Membrane with Mineralised Surface.

One-Part, Low Odour, Rapid Curing Interlaminary Primer for Tremco Polyurethane Products

TREMproof 201/60 is a high-solids, solvent curing modified polyurethane waterproofing membrane that can be applied primer-less to most concrete applications.