Tremco Waterproofing

shable Hydroseal is a heavy bituminous, fibre reinforced, rust inhibiting sealing compound, specially designed to be brushed thickly to any surface.

Vulkem NEM is a single component, moisture curing, high tensile strength and tough curing polyurethane membrane that has been a market leader in Australia for more than 20 years.

TREMproof 250GC is a rapid curing, high solids, low VOC, moisture cure modified polyurethane waterproofing membrane that can be applied to “Green” (24 hour old) concrete.

shable Hydroseal is a heavy bituminous, fibre reinforced, rust inhibiting sealing compound, specially designed to be brushed thickly to any surface.

New Version: https://www.tradiecart.com.au/tremco-vulkem-nem-plus-grey-15-litres-single-coat-polyurethane-membrane/

shable Hydroseal is a heavy bituminous, fibre reinforced, rust inhibiting sealing compound, specially designed to be brushed thickly to any surface.

TREMproof P85 is a 100% solids, spray applied hybrid polyurea waterproofing membrane that allows for rapid installation, and assists with accelerated construction schedules.

AlphaGuard BIO is an extremely high performing composite waterproofing system, designed with a focus on roofing restoration.

Paraseal LG is a multi-layer sheet membrane waterproofing system consisting of a self-sealing, expandable layer of bentonite laminated to an impermeable, high density polyethylene (HDPE).

TREMproof 3300 HD is a self-adhesive, SBS based bituminous waterproofing membrane that is self-protected with a high-density polypropylene (HDPE) facer.

Pabkote 5 provides a quick and economical means of applying a heavy bitumen protective coating to most building surfaces.

Heavy Grade Hydroseal is a thick, inert fibre reinforced solvent cut bituminous mastic.

3mm APP Modified Bituminous Torch Applied Waterproofing Membrane.

Vulkem H2 Plus is a single component, rapid cure, modified acrylic waterproofing membrane, incorporating micro fibres to increase strength and wet film thickness.

TREMproof RT Plus is primarily used for internal tanking and waterproofing of concrete. It is a two component, acrylic modified cementitious coating that can be fully immersed, (i.e. water tanks).

TREMproof 200EC is a two-component water based epoxy primer designed to act as a vapour retarder on porous substrates, to minimise vapour drive into liquid applied waterproofing membranes.

4mm APP Modified Bituminous Torch Applied Waterproofing Membrane with Mineralised Surface.

Pabkote 3 provides a quick and economical means of applying a heavy bitumen protective coating to most building surfaces.

TREMproof 201/60 is a high-solids, solvent curing modified polyurethane waterproofing membrane that can be applied primer-less to most concrete applications.

One-Part, Low Odour, Rapid Curing Interlaminary Primer for Tremco Polyurethane Products

Tremco Vulkem 350R Grey 15 Litres Base Coat

Cuspated 6mm protection sheet/roll.

A non-woven, staple, needle-punched, geotextile fabric specifically designed as a high flow rate, soil filtration medium to protect planters from soil erosion.

Vulkem MPU is a solvent based, single component, Class III polyurethane waterproofing membrane designed specifically for internal wet areas.

Multi-composite Drainage and Protection Boards.

Vulkem 171 primer is a quick-drying, one-part, moisture-curing primer that enhances adhesion to concrete, plywood and other porous substrates where Vulkem urethane sealants, membranes or coatings will be applied.

TREMcrete NWP is a unique brushable penetrative fine cementitious coating specially designed for waterproofing and protection of old and new concrete against positive and negative water pressure.

TREMproof Façade is a high performance, water based acrylic membrane designed to provide a decorative and protective façade coating.

AlphaGuard BIO is an extremely high performing composite waterproofing system, designed with a focus on roofing restoration.

Pabkote 3 provides a quick and economical means of applying a heavy bitumen protective coating to most building surfaces.

Specialty Formulated Dual Layer Sheet Waterproofing Membrane to Provide Superior Protection to Below Grade Structures Against the Presence of Brackish Water

100% stitch-bonded, polyester reinforcing fabric that offers a combination of high strength tensile properties, while also providing good elongation movement of the accompanying membrane for an overall excellent resistance to thermal stresses.

Tremco Vulkem 346 Grey 18.9 Litres Top Coat

Heavy Grade Hydroseal is a thick, inert fibre reinforced solvent cut bituminous mastic.

Paraseal Permanent Seam Tape is a 1.5 mm thick, rubberized SBS bitumen membrane laminated to a polyethylene reinforcing film.

Polyroof LV is a single-component, roof elastomer mastic formulated to ensure elasticity, weather resistance, and durability with ease of application.

Tremco Vulkem 346 Slate Grey 18.9 Litres Top Coat

Paraseal Paramastic is a sodium bentonite filled, bitumen based mastic for use with Paraseal waterproofing membranes.

Tremco Vulkem 951NF Grey 17.4 Litre Kite Two Part Top Coat

Tremco Water-Stop is a composite water stop comprised of expandable, granular bentonite. When water comes into direct contact with Tremco Water-Stop, the bentonite clay expands to form an impenetrable barrier which creates a gasket and mitigates further water ingress.

Bitumen Primer for TREMproof TORCH Systems

Tremco Vulkem 350SL Grey 18.9 Litres Base Coat

Paraseal Paraterm bar is an aluminium alloy especially formulated to exhibit excellent holding power. The high strength assures bowless installation when installed per the pre-drilled holes.

TREMcrete Plug is a one component, rapid hardening plug composition for permanent stopping of water seepage and pressure leaks through cracks and construction joints in concrete, rock, wooden and masonry structures.

While Tremco Anti-Root Additive will provide resistance to most root systems, it is always recommended that plants with non invasive root systems be used in planter boxes and general landscape projects.

TREMproof 90 is a two-component, liquid applied membrane designed to be used under tile and vinyl flooring, for internal wet area waterproofing areas.

Tremco Vulkem 360NF Grey 18.9 Litres Base Coat

Tremco Pressure Seal Tremco Pressure Seal is a aluminium K-Bar pressure bar for use with termination of TREMproof Torch on membranes in compliance with AS 4654.2 – External Above Grade Waterproofing requirements.

Water Based Primer used with AlphaGuard Roofing System

TREMprime non-porous primer is a one-part primer, used on metal or plastic substrates to enhance the adhesion of all Tremco polyurethane sealants and membranes.

AlphaGuard BIO is an extremely high performing composite waterproofing system, designed with a focus on roofing restoration.

TREMstop IX - Centre Bulb, Internal Expansion Joint

TREMstop IX - Centre Bulb, Internal Expansion Joint

APP Modified Bituminous Torch Applied Waterproofing Membrane with Antiroot Properties.

TREMproof 260 is a polymer-enhanced, single component, fluid-applied, bitumen emulsion, waterproofing membrane.

Tremco Vulkem 350NF-R Grey 18.9 Litres Base Coat

DualFlex is a reinforcing flashing that consists of a central strip of stretchy SEBS rubber flanked on either side by an absorbent non-woven felt.

Saltwater Paragranular is a premium, high swelling, hydrophilic, granular, sodium bentonite. When in the presence of water, Saltwater Paragranular reacts and forms an impervious waterproof gel.

Tremco Water-Stop is a composite water stop comprised of expandable, granular bentonite. When water comes into direct contact with Tremco Water-Stop, the bentonite clay expands to form an impenetrable barrier which creates a gasket and mitigates further water ingress.

TREMproof Façade is a high performance, water based acrylic membrane designed to provide a decorative and protective façade coating.

Tremco Vulkem 951NF Slate Grey 17.4 Litre Kite Two Part Top Coat

Premium Grade Metallic Pigmented, Industrial Maintenance Coating.

Single Component, Water-Based, Low VOC Primer.

100% stitch-bonded, polyester reinforcing fabric that offers a combination of high strength tensile properties, while also providing good elongation movement of the accompanying membrane for an overall excellent resistance to thermal stresses.