Tremco Waterproofing

Single Component, Water-Based, Low VOC Primer.

Two Component, Epoxy Primer and Incompatibility Barrier

TREMproof Torch Fleece TREMproof Torch Fleece is a 1.9mm thick, APP modified bitumen fibre back ventilated base sheet. TREMproof Torch Fleece is installed in multi-layer systems either fully adhered, loose laid or mechanically fastened. Usage/Purpose TREMproof Torch Fleece has been designed...

TREMprime non-porous primer is a one-part primer, used on metal or plastic substrates to enhance the adhesion of all Tremco polyurethane sealants and membranes.

TREMproof Contact Adhesive has been developed to provide an adhesive bond for self-adhesive waterproof membranes (TREMproof 3300HD) as well as TREMproof Torch Fleece membranes.

Polythene Dampcourse and Concealed Flashing Barrier.

Polythene Dampcourse and Concealed Flashing Barrier.

TREMstop IX - Centre Bulb, Internal Expansion Joint

Polythene Dampcourse and Concealed Flashing Barrier.

SG010 is a primer designed to enhance the adhesion of single or two-component silicone on metal substrates and plastics.

TREMproof Torch Vent & Cap TREMproof Torch Vent & Cap is a PVC vent and cap used in conjunction with TREMproof Torch Fleece to provide a ventilated, torch applied waterproof roof system.

TREMproof P85 is a 100% solids, spray applied hybrid polyurea waterproofing membrane that allows for rapid installation, and assists with accelerated construction schedules.

Polythene Dampcourse and Concealed Flashing Barrier.

Polythene Dampcourse and Concealed Flashing Barrier.

TREMproof 90 WB primer is a single-component, waterbourne, acrylic primer designed to act as an adhesion promoting primer and to minimize absorption of the TREMproof 90 into porous surfaces and prevent “green cracking” and other inconsistencies in the waterproof membrane.

TREMstop IX - Centre Bulb, Internal Expansion Joint

TREMstop IX - Centre Bulb, Internal Expansion Joint

TREMstop IX - Centre Bulb, Internal Expansion Joint

TREMproof Façade is a high performance, water based acrylic membrane designed to provide a decorative and protective façade coating.

TREMproof W95 is a two component, potable water approved, hybrid polyurea spray used with the TREMproof W95 Primer.

TREMproof Torch Slate Flakes TREMproof Torch Slate Flakes are aggregate mineral chips to cover up lap lines and bitumen “bleed” in the TREMproof 4000M, mineral finish. 

Tremco Water-Stop is a composite water stop comprised of expandable, granular bentonite. When water comes into direct contact with Tremco Water-Stop, the bentonite clay expands to form an impenetrable barrier which creates a gasket and mitigates further water ingress.