Grabo Foam Rubber Replacement Seal
Grabo Foam Rubber Replacement Seal
The Foam-Rubber Seal Type A1 is the secret behind GRABO's versatility, designed to grip heavily textured materials with ease. This patented, high-friction, closed-cell rubber seal is compatible with all GRABO models, ensuring a tight and secure fit. It effectively keeps dust and debris out while enhancing your lifting experience.
With continuous usage, the seals wear out. When the GRABO seal finally wears out, the lifting capacity diminishes. In this case, you can replace the worn seal by hand within seconds with no job delays or downtime.
Our seals are rubber with high-friction silicon and are available from all distributors and retailers. Though your GRABO tool comes with a seal, these replacement gaskets ensure you're always prepared if the original gets damaged. This foam rubber seal enhances your tool's efficiency and reliability.
Black Foam Seal Specifications
- Material: SBR rubber foam sponge
- Color: Black
- Dimensions: 11.5 x 6.9 x 0.7" (293 x 175 x 19 mm)
- Density: 10.6 Lb/cft (170 kg/m³)
- Hardness, Shore C: ~10 ±2
- Tearing Pressure: 1800 Psi (126 kg/cm²)
- Compression to 25% size at: 8.5 Psi (6000 kg/m²)
- Water Absorption: ≤5%
- Shrinkage at 160°F (70°C) for 24 hrs: ≤20%
- Recommended Storage Temperature: Room temperature
Red Seal Specifications
- Material: Silicon Foam
- Color: Red
- Density: 40.5 Lb/cft (650 kg/m³)
- Hardness, Shore C: 55 ±5
- Water Absorption: ≤4%
- Recommended Storage Temperature: Room temperature
Compatible with all GRABO models including GRABO PRO, NEMO GRABO, OTTOVAC, and GRABO HIGHFLOW.
Seal Replacement On A GRABO
No reviews found