Gripset 30SC Green 16kg SBR Wet Area Membrane

Gripset 30SC

SBR Wet Area Membrane

GRIPSET 30SC is a water based SBR latex membrane designed for under tile waterproofing applications. Forming a tough, flexible finish, Gripset 30SC ensures a highly durable, economical membrane option for internal and external areas subject to continuous moisture exposure.

• Water based, solvent free, non-toxic and non-flammable
• Waterproof with ability to withstand continuously wet environments and ponding without re-emulsifying
• Flexible & elastomeric, accommodating normal substrate movement
• Compatible with tile finishes, concrete, render and masonry toppings
• Durable and tough seamless finish
• Excellent vapour barrier & low water vapour transmission properties
• Can be applied by brush, roller, or spray unit on horizontal and vertical surfaces
• Compliant to AS 4858 and AS4654.1 for internal and external wet areas

Uses

• Internal wet areas, bathrooms, laundries and tiled areas
• External wet areas balconies, decks, podiums, terrace floors
• Roofs and rooftop terraces to be covered over with screeds and toppings
• Sandwiching between existing and new concrete substrates
• Liquid vapour barrier between toppings and slabs
• General tiled areas to prevent moisture ingress

Substrates

• Concrete, render and masonry
• Compressed fibre cement sheeting and plasterboard
• Wet area timber sheeting and external grade plywood
• Aerated concrete panels and blocks

Coverage

8m² per 16kg container. Applied in a minimum of 2 coats at 750 microns wet film per coat, achieving a total minimum dry film thickness of 0.9mm.

Note: Coverage is dependent upon surface condition and will vary accordingly as uneven and porous surfaces will require greater coverage to achieve the specified film thickness.

Dry Times

Re-coat: 4 hours
Tiling/toppings: 24-48 hours
Full Cure / Flood test: 10 days

Important: Drying times are based on ambient temperatures @ 23°C and 50% RH. Drying times may vary subject to ambient/surface temperatures, humidity and substrate porosity. Drying/curing times will be extended in cooler conditions and periods of high relative humidity.

Colour

Wet/dry film: Green

Packaging

16kg pails

Precautions

• Not to be used as a trafficable surface
• Not to be used as a finished membrane exposed to UV
• Do not apply to areas when rain is imminent
• Do not apply when surface or ambient temperatures are below 5°C or above 30°C
• Not to be used in areas subject to rising damp or negative hydrostatic pressure
• All finish coatings over this membrane must be water based and solvent free

Technical Data

Shelf Life and Storage

• 12 months when stored in original unopened packaging
• Avoid freezing conditions and off of cold floors
• Best stored at room temperature
• Do not store in direct sunlight