Vendor productsProducts found: 2105

Ardex WPM 155 Rapid Plus is water-based polyurethane-acrylic hybrid waterproofing membrane developed for high performance undertile waterproofing.

Gripset 38FC is a next generation, water based, fast curing, fibre reinforced SBR latex membrane designed for waterproofing wet areas, showers, laundries, roofs, terraces, balconies, decks, concrete slabs and general structures that will be covered over with toppings, tile beds or overlay finishes.

Fast hardening levelling/ smoothing compound for thicknesses from 3 mm to 70 mm: especially recommended for pumping

INFORMATION ARDEX X 18 ARDEX X 18 is a superior white polymer fortified cement-based wall and floor tile adhesive that has been specially formulated with mastic type properties. It contains specially developed fibres that add strength to the tiled area. ARDEX X 18 has an extended open time,...

335 Premium Flexible Adhesive is a high performance thin-bed adhesive for installing a wide range of tiles and stone including low absorption ceramic tile, porcelain tile, natural and manufactured stone using thin-set method of installation.

High performance, deformable cementitious adhesive with extended open time and no vertical slip for ceramic tiles. Especially suitable for the installation of large-size porcelain tiles and natural stone

Two-component, high-flexibility cementitious mortar (with crack-bridging capacity up to 2 mm) applied by trowel or roller for waterproofing balconies, terraces, bathrooms and swimming pools

Bostik Seal N' Flex 1 is a low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough and flexible seal capable of cyclic expansion and compression movement of 100% (+ 50%) of the original installed joint width.

Fibre-reinforced levelling compound for interiors for thicknesses from 3 to 40 mm in a single application.

Sikaflex Fillet Sikaflex Fillet Joint is a one component thixotropic and fast curing flexible sealant for professional waterproofing applications. Uses Sikaflex Fillet Joint is used as a general purpose sealant for sealing joint in building construction. Sikaflex®-Fillet Joint is...

The Moonbay pedestal system is an innovative product range which extends the horizons of possibilities for modern construction and architecture. This unique design produced by Moonbay’s extensive research and development team is made from high quality polypropylene and is UV resistant.

INFORMATION ARDEX X 17 ARDEX X 17 is a white polymer fortified cement-based wall and floor tile adhesive that has been specially formulated with mastic type properties. ARDEX X 17 has an extended open time, is non slump and flexible. Mix with water to achieve a mortar suitable for internal...

Gripset BRW-PFN is a self-adhesive butyl rubber sheet membrane with a high strength needle punched fabric facing that supports the application of surface finishes for waterproofing internal and external areas.

Kerapoxy Design is a two-component, decorative, acid-resistant epoxy grout ideal for glass mosaics.

Kerapoxy Design is a two-component, decorative, acid-resistant epoxy grout ideal for glass mosaics.

ECO SYSTEMS ECO SCREED is a pre blended screed underlayment consisting of graded sand, cement and additives specially formulated for interior and exterior floors prior to the installation of AquaBlokTM waterproofing membranes, ceramic tiles, natural stone, carpet, wood and parquetry flooring. Suitable for a variety of domestic and commercial application.

INFORMATION ARDEX LQ 92 ARDEX LQ 92 is a cement-based underlay for levelling uneven concrete floors prior to tiling. Not recommended for use under vinyl coverings. Self smoothing Polymer modified – apply from feather edge to 25mm Early walkability – tile over after approx 4 hours...

Kerapoxy Design is a two-component, decorative, acid-resistant epoxy grout ideal for glass mosaics.

Kerapoxy Design is a two-component, decorative, acid-resistant epoxy grout ideal for glass mosaics.

ULTRA MASTIK Key Features Holds 600x600mm Wall Tiles Smooth trowel feel Superior bond strength Premium tile adhesive Ultra Mastik is a large format specialist tile adhesive made to reliably hold up to 600 x 600mm with no slip.  The white colour and smooth texture makes for...

HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.

All-in-one rapid drying water-based membrane

Elastoproof B50 Bond Breaker Joint Band Innovative detailing system designed for waterproofing and sealing all types of joints, junctions and general areas subject to movement. Acting as the required system "bond breaker", the B50 Joint Band will accommodate movement in longitudinal,...

DTA Aluminum Retro Fit Transition Trim Mat 9-12mm X 3m Long Allows for a gradual transition between floor finishes from 5mm to 16mm rise. Ideal for domestic or commercial applications. Fast fitting and consistent finish. 3m Long. Tested to slip resistance standard AS...

Description High performance, economical, flexible polymer and rubber fortified adhesive for installing a wide range of tile and stone. Provides great coverage and easy to use. Available in grey, 20kg Uses Suitable for a wide range of substrates: Cement sheet Plaster board...

Bostik CONFLEX Designed for demanding or high traffic applications Conflex is a great all-rounder when it comes to adhesive for tiles. It is a premium rubber-modified tile adhesive designed for demanding or high traffic applications.  Recommended Uses Conflex can be used to...

INFORMATION ARDEX D 2 ARDEX D 2 is a premium dispersion adhesive offering superior non slump and shear adhesion characteristics. Use in wet areas* without compromising adhesion strength over time. Superior non slump capability Excellent workability High flexibility Low odour Unique...

High performance, deformable cementitious adhesive with extended open time and no vertical slip for ceramic tiles. Especially suitable for the installation of large-size porcelain tiles and natural stone

Mapei KERABOND PLUS Cement based powder with superior bond strength suitable for all types of tiles and natural stones. Can be used on interior and exterior floor and wall installations of every type of tile and natural stones onto rigid substrates. Technical data: Pot life of mix: over...

Mapei KERAPOXY ADHESIVE Two-component epoxy adhesive with no vertical slip for ceramic tiles and stone material. TECHNICAL DATA: Pot life of mix: 45 minutes. Open time: 60 minutes. Set to light foot traffic: approx. 10-12 hours. Ready for use: 2 days. Colours: grey Application: suitable...

Description High performance, flexible polymer, fortified cement based adhesive for installing tile and stone over a wide range of substrates. Advanced polymer technology promotes a permanent bond when using the conventional mud bed method. Great coverage and easy to use in a range of...

Kerapoxy Design is a two-component, decorative, acid-resistant epoxy grout ideal for glass mosaics.

Kerapoxy Design is a two-component, decorative, acid-resistant epoxy grout ideal for glass mosaics.

Kerapoxy Design is a two-component, decorative, acid-resistant epoxy grout ideal for glass mosaics.

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds.

Description High performance, flexible polymer, fortified cement based adhesive for installing tile and stone over a wide range of substrates. Advanced polymer technology promotes a permanent bond when using the conventional mud bed method. Great coverage and easy to use in a range of...

Kerapoxy Design is a two-component, decorative, acid-resistant epoxy grout ideal for glass mosaics.

ARDEX STB Tape Self-Adhesive Butynol® Tape Provides waterproofing seal Highly flexible to accommodate structural movement Used within internal and external environments Information ARDEX STB Tape ARDEX STA Tape ARDEX STB/STA Self Adhesive Butynol® Tape is an uncured butyl...

Description Commercial grade tile and stone adhesive that is high performance, flexible, Polymer and rubber fortified. Great coverage and easy to use. Available in light grey, 20kg Uses Adheres to a wide range of substrates Cement sheet Plaster board Waterproof membranes...

Kerapoxy Design is a two-component, decorative, acid-resistant epoxy grout ideal for glass mosaics.

Bostik EXCELFLEX Flexible and versatile, general purpose tiling adhesive Rubber modified flexible tile adhesive.  Well suited to general tiling where flexibility is desired.  Suitable for domestic and general tiling. Where to Use Residential Commercial Industrial...

Kerapoxy Design is a two-component, decorative, acid-resistant epoxy grout ideal for glass mosaics.

Kerapoxy Design is a two-component, decorative, acid-resistant epoxy grout ideal for glass mosaics.

INFORMATION ARDEX FS-DD Non-sanded cement-based, wall and floor grouting compound which is specially designed for polished porcelain to avoid scratching the surface of the tile. Water repellent due to special hydrophobing agent Dirt resistant – longer lasting new look, as dirt is unable...

Sikalastic WPU Elastomeric, single component, fibre reinforced, water based polyurethane membrane. Sikalastic® WPU is a premixed, single component, water based polyurethane waterproofing membrane. Sikalastic® WPU is a Class III membrane with high...

ULTRA LEVEL C500 Superior vinyl and timber underlay ⠀ Product overview Bostik ULTRA LEVEL C500 is a rapid-hardening polymer-modified cementitious underlay, formulated for maximum flow without shrinkage or cracking. ⠀ Product overview Bostik ULTRA LEVEL C500 is a...

Kerapoxy Design is a two-component, decorative, acid-resistant epoxy grout ideal for glass mosaics.

PascoFlex PU25 Polyurethane Sealant is a premium grade one-part polyurethane sealant that cures to form a tough and flexible weather-tight seal, capable of accommodating 50% (±25%) joint movement.

Pasco Hypersil 912 is a high performance neutral cure sanitary grade silicone sealant which cures to form a tough and flexible waterproof seal with the added advantage of resisting the growth of mould and mildew.

ADEFLEX TRADE Deformable rubber modified cement based adhesive for bonding most types of tiles in interiors Applications: - Bonding ceramic tiles and mosaics on concrete, cementitious renders and screeds, block work, rendered brickwork, plasterboard, fibre cement sheeting. - Timber floors,...

MAPEMASTIC EASY DESCRIPTION: Ready-to-use paste adhesive with no vertical slip and extended open time for the installation of ceramic tiles on interior walls and floors. APPLICATIONS: For bonding most types of glazed and unglazed ceramic and porcelain tiles and mosaics on...

INFORMATION ARDEX EG 15 ARDEX EG 15 is a high performance epoxy grout designed for situations that require strict standards of hygiene, high chemical and physical resistance. ARDEX EG 15 is exceptionally easy to clean up during application. It can be used in joints up to 15mm wide on walls...

Gripset P39 Polyurethane Hybrid Membrane Gripset P39 is a versatile, high performance membrane based on advanced hybrid polyurethane technology. Suitable as an exposed membrane in external applications, or for use under tiles and other finishes, P39 offers superior sealing and durable...

Moonbay Decking Joist Cradle 60mm X 60mm 60mm Joist cradle To hold timber battens, composite battens, aluminum or steel support sections joist, wooden beams. 60mm gap with cross way (suitable for beam size 20-60mm).

Information ARDEX WPM 002 A rapid drying, two part waterproofing membrane specially designed for use under tiles. Advanced acrylic polymers – will not re-emulsify Rapid drying time, normally ready to tile in 16-24 hours Class III two component cementitious membrane that conforms to...

MAPEGUM WPS DESCRIPTION: Fast-drying flexible liquid membrane for interior waterproofing. APPLICATIONS: Liquid waterproofing membrane for interior surfaces provided they are not continually immersed in water or subject to rising damp. Mapegum WPS can be used on all types of...

DTA Grout / Epoxy Gun Grout Applicator Suitable for normal grout & epoxy grout. Minimises waste & cleanup. Body cartridge is reusable and can easily be replaced with any 50mm PVC pipe.

Kerapoxy Design is a two-component, decorative, acid-resistant epoxy grout ideal for glass mosaics.

A sanded, cement-based tile grout. It is ideal for use in joint widths 2mm to 50mm wide without shrinking. Exceptionally easy to use and has superior colour consistency.

The lightweight deformable adhesive to make tilers’ work easier, ideal for installing large format tiles.