Waterproofing

MAXPLUG is a quick-setting cement-based mortar that instantly stops running water from cracks, fissures, holes or other openings in concrete and masonry.

100% stitch-bonded, polyester reinforcing fabric that offers a combination of high strength tensile properties, while also providing good elongation movement of the accompanying membrane for an overall excellent resistance to thermal stresses.

TREMproof 200EC is a two-component water based epoxy primer designed to act as a vapour retarder on porous substrates, to minimise vapour drive into liquid applied waterproofing membranes.

ARDEX Construction Detail Bandage is a thermoplastic elastomeric material that’s used for covered outdoor application.

High performance, two-component, water based epoxy primer and waterproofing barrier membrane

AlphaGuard BIO is an extremely high performing composite waterproofing system, designed with a focus on roofing restoration.

Paraseal Paramastic is a sodium bentonite filled, bitumen based mastic for use with Paraseal waterproofing membranes.

The high-quality covers made of brushed stainless steel complete the design aspirations of the wedi Fundo Riolito neo floor elements.

TREMproof 250GC is a rapid curing, high solids, low VOC, moisture cure modified polyurethane waterproofing membrane that can be applied to “Green” (24 hour old) concrete.

LATAPOXY Moisture Shield is a 2 component, roller applied epoxy coating specifically designed to reduce moisture vapour emissions in concrete and other substrates

ARDEX WPM 330 is an extremely weather resistant water based acrylic waterproofing membrane.

RLA Moisture Seal is a high performance 2 part water based epoxy waterproofing system designed as a water and vapour proof coating under water proofing systems, coatings, tiles, resilient and timber flooring.

4.0mm Plain Bitumen Membrane.

Ardex Protection Board Fluted Polyethylene Board ARDEX Protection Board is a fluted polyethylene board designed to be used after the membrane installation and prior to backfilling to protect the membrane from mechanical damage during the backfilling operation. Size: 1,830 X 1,220mm fluted...

Cuspated 6mm protection sheet/roll.

Primeseal MC Primer & Sealer Primeseal is more than a primer and more than a sealer. In fact it is the ultimate in both roles. As a primer for membranes it provides an exceptional bond coat for almost all porous substrates. It is also a great sealer and waterproofing coating in its own...

LATAPOXY Moisture Shield is a 2 component, roller applied epoxy coating specifically designed to reduce moisture vapour emissions in concrete and other substrates

Information ARDEX WPM 002 A rapid drying, two part waterproofing membrane specially designed for use under tiles. Advanced acrylic polymers – will not re-emulsify Rapid drying time, normally ready to tile in 16-24 hours Class III two component cementitious membrane that conforms to...

TREMprime non-porous primer is a one-part primer, used on metal or plastic substrates to enhance the adhesion of all Tremco polyurethane sealants and membranes.

wedi's Fundo Riolito Neo System feature the only fully sealed and factory integrated waterproof drain assembly available in the market of customizable shower floor systems with linear drainage.