Waterproofing

A premixed, one-pack, water-based, microfibre reinforced acrylic, flexible, waterproofing membrane.

Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures.

A set of butyl self adhesive collars containing two collars for a tap spindles and another collar for a shower head.

DuraCore's Moisture Proof is a liquid moisture barrier and densifier for new or old concrete that requires no mixing and is applied simply by pouring & spreading or spraying with a pump up spray pack. A soft broom is required for an even application and to spread out any puddled areas....

Protection sheeting is a puncture resistant plastic product used predominantly to protect below ground waterproofing membranes from back fill and root growth.

Dux 19C is a 120gsm grade filter fabric for use in sub-surface drainage applications. Otherwise known as geofabric or geotextile.

ARDEX WPM 3000X is a peel and stick SBS rubber modified bituminous/asphalt membrane.

Fabric Bandage 100mm X 100m

Gripset Xpress SP Rapid Set Primer Gripset Xpress SP is a solvent free primer specifically developed with adhesion enhancing properties for non-porous, dense and smooth substrates. It is designed for use on both wall and floor surfaces, achieving high adhesion without the need for etching...

Bitflex is a waterborne bitumen emulsion modified with a synthetic rubber co-polymer to provide excellent waterproofing properties and good flexibility.

Cemproof Flex is a two-component, flexible cementitious waterproofing product ideal for use in both positive and negative side waterproofing applications and for use direct onto damp surfaces.

WB2K is a two component waterborne epoxy sealer that combines the excellent adhesion and toughness of epoxy resins with the advantages of using water as a carrier.