Vendor productsProducts found: 259

DuraCore's Moisture Proof is a liquid moisture barrier and densifier for new or old concrete that requires no mixing and is applied simply by pouring & spreading or spraying with a pump up spray pack. A soft broom is required for an even application and to spread out any puddled areas....

BluProof is an elastomeric, single component SBR, fibre reinforced waterproof membrane that has been designed for general wet area waterproofing applications including: • Wet areas and shower alcoves • Below ground (external) applications such as basement walls BluProof...

DuraCore's Moisture Proof is a liquid moisture barrier and densifier for new or old concrete that requires no mixing and is applied simply by pouring & spreading or spraying with a pump up spray pack. A soft broom is required for an even application and to spread out any puddled areas. Moisture...

MAXSEAL FOUNDATION MAXSEAL FOUNDATION ⠀is a cement based product which, together with special additives and selected aggregates gives it waterproofing characteristics, whether the foundations are in concrete or masonry. It gives great protection to foundation concrete thanks to its high...

Expanding Waterstops for Concrete Construction Joints.

For all sealing, waterproofing and bonding applications where protection against mould and mildew is required.

FulaFlex 625 is a high performance, solvent free, moisture curing hybrid polymer construction sealant.

Multithane Std is a single pack, liquid applied, moisture curing, self-levelling, waterproofing membrane which cures to form a seamless, tough, durable, elastomeric (class 3 ) waterproofing membrane.

A slip-resistant, durable, permanently flexible coating for foot trafficable areas.

Soudaflex 40 FC is a high quality, one component polyurethane sealant with high modulus for a wide range of sealing and bonding applications.

⠀ MAXSEAL FLEX MAXSEAL FLEX ⠀is a two-component product. Component A is a water-based special acrylic resin and component B, is a mortar based on a mixture of special cements, additives and well-graded aggregates. Once applied and cured, ⠀MAXSEAL® FLEX⠀ provides a non-toxic, flexible and...

Polyethylene Backing Rod Closed Cell 10mm X 250m

Expanding Waterstops for Concrete Construction Joints.

For all sealing, waterproofing and bonding applications where protection against mould and mildew is required.

Primeseal MC Primer & Sealer Primeseal is more than a primer and more than a sealer. In fact it is the ultimate in both roles. As a primer for membranes it provides an exceptional bond coat for almost all porous substrates. It is also a great sealer and waterproofing coating in its own...

ONE-COMPONENT FLEXIBLE WATERPROOF COATING AGAINST POSITIVE AND NEGATIVE PRESSURE FOR CONCRETE AND MASONRY

Primeseal MC Primer & Sealer Primeseal is more than a primer and more than a sealer. In fact it is the ultimate in both roles. As a primer for membranes it provides an exceptional bond coat for almost all porous substrates. It is also a great sealer and waterproofing coating in its own...

Polyethylene Backing Rod Open Cell 15mm X 250m

Aquaswell is a high quality, one component polyurethane sealant which swells up in contact with water to create a water- and gas tight seal in pipe- and cable penetrations.

Protection sheeting is a puncture resistant plastic product used predominantly to protect below ground waterproofing membranes from back fill and root growth.