Waterproofing

Hyperband Rubberised Joint Band is used with waterproofing systems to enhance the sealing of substrate junctions, movement joints, cracks and various other areas subject to potential movement. Hyperband Rubberised Joint Band is especially useful for the reinforcing of waterproofing membranes in...

WB2K is a two component waterborne epoxy sealer that combines the excellent adhesion and toughness of epoxy resins with the advantages of using water as a carrier.

WeldTec Pre-Applied Tanking Membrane

A clear solvent-based primer designed to seal and improve the adhesion of dense or highly porous substrates.

A premixed, one-pack, water-based, microfibre reinforced acrylic, flexible, waterproofing membrane.

Membryl® is a waterborne elastomeric waterproofing membrane with outstanding long-term UV stability.

Roofing and Tanking Membrane.

Butynol Seam Primer Prior to Tape Application.

Deckweb is a basic polyester reinforcing tape for use with most water based membranes.

Remedial Membranes – Clear Waterproofing Membrane is a two part clear, hybrid water based, aliphatic polyurethane waterproofing membrane / coating which cures to form a clear, tough, durable, flexible, trafficable, abrasion and anti-scratch resistant, waterproof membrane in a clear gloss finish....

ARDEX WPM 157 is a one component moisture cured polyurethane system for waterproofing planter box internals, roof and deck areas (that are to be paved or covered) and landscaped decks.

ARDEX WPM 300 is a two component water based epoxy polyamide membrane/barrier coating.

Self-Adhesive Vented Base Sheet.

Bostik Seal N' Flex 1 is a low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough and flexible seal capable of cyclic expansion and compression movement of 100% (+ 50%) of the original installed joint width.

Powerflex® is a rubber polymer cement additive developed to improve the strength, adhesion, and chemical/moisture resistance of cement screeds, mortars and renders.

Bostik Seal N' Flex 1 is a low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough and flexible seal capable of cyclic expansion and compression movement of 100% (+ 50%) of the original installed joint width.

ARDEX WPM 300 is a two component water based epoxy polyamide membrane/barrier coating.

Acrylic PU water-based waterproofing membrane developed for high performance undertile waterproofing.

Fully compliant Class III waterproof membrane that is easy to install, UV stable and compatible with all good quality tile adhesives. It is fast drying and rain safe in approx. 2 hours at 21°C.

ARDEX WPM 300 is a two component water based epoxy polyamide membrane/barrier coating.