Gripset E60 10 Litres Water Based Epoxy Primer

Gripset E60

Water Based Epoxy Primer

Water based epoxy primer and protective coating against moisture penetration and rising damp. Can be used directly over damp mineral-based surfaces and newly laid "green" concrete. Provides a compatible surface for applying membrane, adhesive and other decorative finishes directly over. Prevents rising damp and moisture ingress. A non-flammable and odourless primer that is compatible in bonding the surfaces for Gripset membranes and other finishes.

Uses

• Moisture barrier to negative sides of underground wall structures to prevent moisture ingress (basements, lift pits, retaining walls etc)
• Protective primer over concrete and mineral surfaces containing residual dampness, enabling the application of finished coatings without blistering or delamination
• Protection against rising damp and efflorescence on wall and floor surfaces to enable direct fixing of vinyl, carpet, tiles, timber, levelling compounds, screeds etc over

Substrates

• Concrete, masonry surfaces, renders, screeds.
• Concrete blocks and aerated concrete.

Coverage

• Vapour block primer/efflorescence prevention 1 litre/3m²
• Moisture Barrier 2 x coats at a coverage of 1 litre/3m2per coat

Dry Times

Recoat: 2-4 hours  Finishes: 24 hours

Colour

Wet/Dry: Pale grey

Packaging

10 litre Kit - Part A & Part B in 5 Litre in plastic pails 20 litre Kit – Part A 10 litre of product in 20 litre pail & Part B in 10 litre plastic pail