SAS Tradies Choice FCM 15 Litres SBR Waterproofing Membrane
SAS Tradies Choice FCM 15 Litres SBR Waterproofing Membrane
Description
Tradies Choice FCM is a Blue Class III fibre reinforced SBR waterproofin g membrane that has been designed for a range of waterproofing applications for under Tile. Can be used for wet areas, balconies and deck areas that are going to be tiled and not left expo sed . Excellent adhesion to concrete , masonry , renders and internal cement sheeting and plaster board sheeting. For external sheeting such as Scyon, the substrate must be primed with Tradies Choice moisture Barrier
CLASSIFICATION
Meets the requirements of: • AS 4858:2004 wet area membranes as a Class III
- AS 3740: 2004 waterproofing of wet areas within residential buildings.
- AS 4654.1 2012 waterproofing membrane for external above ground use
SURFACE PREPARATION
The surface must be clean , dry and free of dust oil, grease, wax and curing compounds. The substrate must be installed according to the relevant standards and manufacturer recommendations. All porous surfaces must be primed with SAS Master primer. For non porous substrates such as external cement sheeting e.g. Scyon it must be primed with Tradies Choice Moisture Barrier. As a wet area mem brane requires a suitable bond breaker at all substrate junctions please use Tradies Choice FC Polyurethane sausage
MOVEMENT JOINTS
Movement joints must be in accordance with Australian Standards AS 3958
DRYING TIME
Tradies Choice FCM is not designed for use as an exposed membrane
Recoat 1 hour @ 23 C
Dry Film 3 hours @ 23 C
Tiling Toppings 4 hours @ 23 C
Information based normal ambient temperatures of 23 C and 50% RH
*Temperature , humidity and porosity will vary dry times
COVERAGE
A minimum of 2 coats is recommended to be applied at a total minimum coverage of 1.5 Litres / m2 . 1mm dry film thickness is recommended for all applications wall and floor
PACKAGING
- 15KG Pails
Application
- Waterproofing should be applied in accordance with the Australian Standards AS 4858 : 2004
- All porous surfaces must be primed with SAS Master primer. For non porous substrates such as external cement sheeting e.g. Scyon it must be primed with Tradies Choice Moisture Barrier. As a wet area membrane requires a suitable bond breaker at allsubstrate junctions please use Tradies Choice FC Polyurethane sausage.
- For all other applications not mentioned please contact the SAS Technical team.
- Note: Protect waterproofing from other trades and weather until cured.
- A minimum of 2 coats is recommended to be applied at a total minimum coverage of 1.5 Litres /m2.
- Tradies Choice FC M must be applied to achieve a minimum of 1mm Dry film thickness ensuring the membrane is to perform as specified.
Precautions
- Tradies Choice FCM cannot be applied in temperatures above 35 C or below 5 C
- Tradies Choice FC M cannot be used in immersed situations like swimming pools spas etc.
- Tradies Choice FC M cannot be used for hydrostatic pressure e.g. rising damp contact the SAS Technical Team for further information.
Technical Data
- Appearance Blue liquid
- Elongation --> 4 8 0
- Tensile Strength > 1.2mpa
- Water Vapour Transmission 0.4/24/m2
No reviews found