Interface Intertac Plus 15 Litre Carpet Tile Adhesive

$150.00
($165.00 inc gst)
+
Add to wish list Check stock
Shipping time and rates

Ships from: Melbourne Metro

Save up to 60% on Shipping
Same Day Delivery

To Metro Melbourne.

Order before 1pm for Same Day Delivery

Express 2-3 Hour Delivery
Online Only
BrandsInterface Product TypePressure Sensitive Adhesives, Carpet Adhesives, Vinyl Adhesives DeliverySame Day Size15 Litres
Description

Interface Intertac Plus 15 Litre Carpet Tile Adhesive

Intertac Plus is a Solvent Free, Low Odour, Low VOC Pressure Sensitive Adhesive formulated for installing Interface GlasBac, CushionBacRE, CQuestBio and CQuestBioX Carpet Tiles as well as Interface Luxury Vinyl Tiles and Planks.

Intertac Plus can be applied to concrete substrates with a moisture content up to 99% Relative Humidity (moisture reducing) tested with the In-Situ Probe method and concrete substrates with pH readings up to 12.0.

Features & Benefits

  • Installer Friendly
  • Green Star Compliant
  • 99% RH Resistant Formulation
  • Solvent Free
  • Anti-microbial Formulation (Intersept)
  • Low Odour
  • Low VOC Emission
  • Australian Made

Spread Rate

  • V1 notched trowel (1.6mm × 1.6mm): Up to 5m² per litre — recommended for LVT
  • Long Nap Roller (≥10mm pile): 10–14m² per litre — recommended for GlasBac carpet tiles
  • V2 notched trowel (2.4mm × 2.4mm): Up to 3m² per litre — recommended for CushionBacRE

Application

Spread adhesive with the recommended notched trowel or roller. Intertac Plus is used in dry mode — allow the adhesive to dry and become clear before laying tiles. This limits adhesive transfer to the tile backing, enabling tiles to be repositioned with a clean backing.

A stronger bond can be achieved by laying material into the adhesive film just prior to it drying completely. Roll in both directions to ensure transfer.

Setting Times

Approximately 30 minutes to 1 hour at 20°C. Times may vary depending on substrate absorbency, temperature and humidity.

Surface Preparation

All surfaces must be absorbent, dry, smooth, sound and clean, free of wax, grease, paint, previously used adhesive, polish, PVC based membranes, curing compounds and hydrostatic pressure. Minimum subfloor temperature: 10°C. Highly absorbent concrete subfloors should be primed with Roberts R400 primer prior to adhesive application.

Container Size

15 Litre pail

Shelf Life

18 months in unopened containers stored out of direct sunlight in well ventilated areas.

Features
MPN - Manufacturer Part Number
INT15
Product Type
  • Carpet Adhesives ,
  • Pressure Sensitive Adhesives ,
  • Vinyl Adhesives
Product URL
https://www.interface.com/AU/en-AU/carpet-tile/msds.html
Delivery
Same Day
Size
15 Litres
Attachments

Carpet Tile Installation Guide (1,066 Kb) [Download]

LVT Installation Guide (2,273 Kb) [Download]

Safety Data Sheet (SDS) 2024 (95 Kb) [Download]

Technical Data Sheet (TDS) (778 Kb) [Download]

Reviews

No reviews found

Fast Delivery
We deliver fast throughout Metropolitan Melbourne. Pick the delivery speed that works best for you.
Same Day Delivery
Get your order delivered today with our reliable same-day service at an affordable rate.


Order by 1:00 PM
Express Delivery
Ultra-fast delivery for time-sensitive orders when every minute counts.


Order by 3:00 PM