MJS Max Prep Feather-It 1kg Featheredge Compound
MJS Max Prep Feather-It 1kg Featheredge Compound
MJS Feather-It provides a smooth finish coat for various substrates that will receive a floor covering. It allows installation of most floor coverings in as little as 30 minutes on suitable substrates.
Features
- Rapid drying - walkable in 30 minutes
- Applied from a true fine edge up to 3mm in one application
- Suitable for internal and external environments
- Up to 100% relative humidity (RH)
- Suitable substrates: concrete, wood, ceramic, and quarry tile
- No primer required on suitable substrates
Application
MJS Feather-It is easily applied to any prepared surface using a steel trowel. Apply sufficient pressure to fill all defects and to fine the product into the subfloor surface. It is not necessary to leave a minimum thickness on the substrate. Use the least amount possible to obtain the desired smoothness.
Mixing
Depending on site conditions, applicator's preference, and the finished surface requirements, mix 2–2.25L of water to 4.5kg of powder. Always mix the powder into the water. Mechanical mixing using a mixing paddle and electric drill will produce a creamier, smoother consistency. Do not overwater.
Technical Data
- Maximum thickness: 3mm per application (internal & external concrete), 3mm (internal timber)
- Pot life: Approximately 18 minutes at 23°C
- Minimum subfloor temperature: 10°C
- Shelf life: 12 months in dry conditions, unopened packaging
- Featheredge Compounds
No reviews found