RLA RL6000 20 Litres Synthetic Grass Adhesive
RLA RL6000 Synthetic Grass Adhesive
RLA RL6000 Synthetic Grass Carpet Adhesive is an all-weather solvent-based (flammable) adhesive specifically formulated for the outdoor installation of non-stretch open weave polypropylene-backed synthetic grass carpets. Not recommended for urethane and E.V.A.-backed carpets. RLA RL6000 Synthetic Grass Carpet Adhesive develops high strength quickly and, when cured, will withstand unfavourable weather conditions.
Recommended Use
RLA RL6000 Synthetic Grass Carpet Adhesive will bond securely to cured concrete, asphalt, exterior grade wood and other clean paved surfaces and is ideal for use around swimming pools, balconies, outdoor recreational areas, and other applications which are subject to moisture after fixing.
Spread Rate
| V2 2.4mm x 2.4mm notched trowel | 3 m² per litre |
| V3 3.2mm x 3.2mm notched trowel | 2 m² per litre |
| U 3.2mm x 3.2mm notched trowel | 1.6 m² per litre |
Spread rates may vary depending on the condition and substrate absorbency.
Surface Preparation
Follow all current Australian Standards, including Australian Standard 2455.2.2019 "Textile Floor Coverings Installation Practice" and "Floor Coverings 1884-2021 Resilient Sheet & Tiles - Laying & Maintenance Practices".
All surfaces to be bonded shall be absorbent, dry, smooth, sound, and clean. Subfloors must also be free of wax, grease, paint, previously used adhesive, polish, PVC-based membranes, curing compounds, hydrostatic pressure and any other impurities that may affect adhesion.
The minimum subfloor temperature before commencing surface preparation and adhesive application is 10°C.
Application
Spread adhesive with the recommended V-notched trowel. Dimensions of notching should be such as to provide a minimum 75% coverage of adhesive to the back of the flooring. As most synthetic grass and fibre bonded carpets have a highly textured backing, a deep 3.2mm x 3.2mm notching is recommended.
Allow adhesive to develop some initial tack — approximately 5-10 minutes at 20°C before lowering floorcovering into the wet film of adhesive and rolling to ensure adhesive transfer has occurred onto the backing of the floorcovering.
Do not allow heavy traffic for 24 hours.
Safety
HIGHLY FLAMMABLE. Keep away from heat, sparks, open flames and hot surfaces — no smoking. Use only outdoors or in well-ventilated areas. Wear protective gloves and eye and face protection. Clean tools immediately after use with RLA approved ROBERTS R900 Cleaner.
Container Size
20 Litres
- Synthetic Grass & Sports Surface Adhesives
No reviews found