WaterproofingProducts found: 62

HYDRO BAN Fillet & Sealant is a one component, fast curing, hybrid elastomeric adhesive and sealant.

Elastoproof B10 Bond Breaker Joint Band Innovative detailing system designed for waterproofing and sealing all types of joints, junctions and general areas subject to movement. Acting as the required system "bond breaker", the B50 Joint Band will accommodate movement in longitudinal,...

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift.

Rubber tape sandwiched between two layers of non-woven fabric to form elastic joints in waterproofing systems.

Bostik Seal N' Flex 1 is a low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough and flexible seal capable of cyclic expansion and compression movement of 100% (+ 50%) of the original installed joint width.

Fabric Bandage 100mm X 50m

Aus-Bond Primer, Grout & Mortar Admix Aus-Bond Primer, Grout and Mortar Latex Admix is a specially formulated, self-crosslinking latex acrylic additive for use as a primer for porous substrates prior to waterproofing, tiling or applying self-levelling mortars. Aus-Bond Primer, Grout and...

Solvent-free, low odour acrylic primer in water dispersion with very low emission of volatile organic compounds (VOC)

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

Two-component solvent-free primer.

Fabric Bandage 100mm X 50m

Fabric Bandage 150mm X 50m

Alkaline Resistant Fiberglass Wall Mesh 165 G/m²

ARDEX WPM 157 is a one component moisture cured polyurethane system for waterproofing planter box internals, roof and deck areas (that are to be paved or covered) and landscaped decks.

Fully compliant Class III waterproof membrane that is easy to install, UV stable and compatible with all good quality tile adhesives. It is fast drying and rain safe in approx. 2 hours at 21°C.

Bostik Seal N' Flex 1 is a low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough and flexible seal capable of cyclic expansion and compression movement of 100% (+ 50%) of the original installed joint width.

Fabric Bandage 125mm X 100m

Bostik Seal N' Flex 1 is a low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough and flexible seal capable of cyclic expansion and compression movement of 100% (+ 50%) of the original installed joint width.

RLA WPU is an elastomeric one part polyurethane/Acrylic fibre reinforced water based membrane developed as a high performance internal/ external membrane for most general waterproofing applications.

Fabric Bandage 125mm X 200m

Multi-purpose, self adhesive band designed for detailing and flashing a variety of surfaces.

Ensures effective detailing and enhanced sealing around penetrations such aspipes, drainage outlets, cabling and any substrate fixtures by protecting againstmovement, vibration and cracking. Elastoproof Collars provide a permanent tightseal against water ingress enabling penetrations to withstand a variety ofmovement conditions without compromising the membrane seal.

Nanodefense EcoNanodefense® Eco develops total water-resistance under positive thrust guaranteeing the protection of absorbent substrates or those subject to damp, or in constantly humid environments. Internal application only.

Multi-purpose self-adhesive sealing band designed for flashing and detailing avariety of surfaces. With outstanding adhesion properties of the butyl rubberbacking, the Elastoproof Butyl Tape is ideal for sealing internal and externalsurfaces that require protection against moisture ingress, vibration and flexing.Providing an instant seal to the surface it is applied to, Butyl Tape avoids downtime for drying or curing and can be finished over with Gripset adhesives,membranes, coatings, mortars, adhesives and renders.

Information ARDEX Multiprime ARDEX Multiprime is a water-based primer for improving adhesion of ARDEX products to various porous substrates. Water-based – no solvent hazard Quick drying Improves adhesion Substrates: Fibre-cement sheet Concrete, render, screeds Masonry and...

A red water-based acrylic primer designed to seal porous substrates and enhance the adhesion of subsequent Superflex membranes.

Roller Cover 230mm

DTA Waterproofing Kit A collection of your most used waterproofing tools . Kit includes: 2X 230mm, 10mm nap rollers. 230mm nap roller handle. 100mm brush. Plastic tray. Ideal for waterproofing membrane.

Paint Brush 75mm (ATECH)

PLANISEAL MR DESCRIPTION: Two component water-based epoxy primer and moisture barrier suitable for green concrete and damp substrates TECHNICAL DATA: Consistency: liquid. Colour: light grey - semi-gloss when dry, matt when aged Drying time: - recoat in 2-4 hours - apply finish...