Vendor productsProducts found: 2094

Mapei KERAFLEX High performance cementitious adhesive, with no vertical slip and extended open time for ceramic tiles and stone material. Applications: Interior and exterior floor and wall bonding of all types of ceramic tiles and ceramic mosaics, stone material (as long as moisture stable)...

Megapoxy PM is specially formulated structural non-sag epoxy filling paste and adhesive. This easy to use two-part epoxy sets after mixing to an extremely durable adhesive ideal for bonding natural stone, concrete, steel, timber, glass and masonary. Its easy to use 1:1 mixing make it suitable for onsite applications.

ARDEX P9 Single Part Primer is a water-based primer used for improving the adhesion of ARDEX products to smooth, dense and various non-porous substrates.

Gripset 38FC is a next generation, water based, fast curing, fibre reinforced SBR latex membrane designed for waterproofing wet areas, showers, laundries, roofs, terraces, balconies, decks, concrete slabs and general structures that will be covered over with toppings, tile beds or overlay finishes.

Description The excellent thixotropic properties means you can hang tiles on vertical surfaces and there is low shrinkage, which allows for packing up under tiles plumb and level to the wall or floor. Available in a range of colours. White, off white and grey, 20kg Uses...

General Purpose Cement General Purpose Cement is a cost effective, high quality building material. The level of consistency and versatility of General Purpose cement makes it an ideal choice in virtually all construction applications. General Purpose Cement fully complies with the...

Master Flex ECO C2S1T Tradies Choice Master flex is a rubber modified, cement based tile adhesive designed for internal and external applications on b oth walls and floors. Can be used for ceramic, porcelain and vitrified tiles. Tradies Choice Master flex can be used for tiling over...

ADESILEX P4 Fast-setting cement based levelling compound for internal and external use from 3 to 20 mm thick. Applications: Internal and external levelling compound for all normal supports used in building provided they are clean, such as concrete slabs, cement screeds, old ceramic...

Gripset C-Mastic High Strength Polymer Modified Tile Adhesive Gripset C-Mastic is a high strength polymer modified tile adhesive designed for commercial applications.White and non-slump, C-Mastic has been developed with enhanced fibre technology to provide superior shear strength for large...

Efflock is a high performance, water based, VOC free, liquid additive designed for the bulk impregnation of cement based building materials to protect against efflorescence and damp.

Special cleaning solution for epoxy grout, suitable for cleaning operations after completing laying work and for removing traces and stains of epoxy grout (such as KERAPOXY, KERAPOXY P, KERAPOXY DESIGN and KERAPOXY CQ) from the surface of ceramic and glass coverings.

A SYNTHETIC LATEX BASED PRIMER FOR POROUS SURFACES

Sand & Cement Sand & Cement is a carefully proportioned blend of graded sands and cement, designed for use as a general purpose mortar product. Sand & Cement can be used in certain handyman, landscaping and plumbing applications and is suitable for use with various substrates.

High performance cementitious grout, polymer modified, for joints up to 6 mm.

Gripset OP Non-Porous Surface Primer Solvent free primer specifically developed with adhesion enhancing properties on metals, and non absorbent substrates. Suitable for both vertical and horizontal surfaces, achieving high adhesion without the need for etching or using solvents.Outstanding...

High performance cementitious grout, polymer modified, for joints up to 6 mm.

The Moonbay pedestal system is an innovative product range which extends the horizons of possibilities for modern construction and architecture. This unique design produced by Moonbay’s extensive research and development team is made from high quality polypropylene and is UV resistant.

Kerapoxy Design is a two-component, decorative, acid-resistant epoxy grout ideal for glass mosaics.

Gripset GP General Purpose Primer Multipurpose 2 in 1 primer and a bonding agent. As a primer, Gripset GP enhances adhesion of Gripset membranes over porous surfaces. As a bonding agent, it improves adhesion, strength and waterproof properties of cement-based compounds. Suitable for porous...

Our 1.5mm standard clip is suitable for tiles with a thickness between 3-12mm. Made from high quality plastics to ensure a clean break every time. Compatible with most wedge levelling systems on the market.

Diarex Ultra Thin Turbo Blade The original Diarex Ultra Thin blade for fast, clean dry-cutting of Porcelain, Granite, Marble and Ceramic tiles. • 7mm high segment Product Type: Diamond Blades (<230mm) Material: Granite, Marble, Porcelain & Ceramic Diameter: 105mm, 115mm, 125mm,...

Pasco Hypersil 912 is a high performance neutral cure sanitary grade silicone sealant which cures to form a tough and flexible waterproof seal with the added advantage of resisting the growth of mould and mildew.

Mapei KERAFLEX High performance cementitious adhesive, with no vertical slip and extended open time for ceramic tiles and stone material. Applications: Interior and exterior floor and wall bonding of all types of ceramic tiles and ceramic mosaics, stone material (as long as moisture stable)...

Pasco Hypersil 912 is a high performance neutral cure sanitary grade silicone sealant which cures to form a tough and flexible waterproof seal with the added advantage of resisting the growth of mould and mildew.