Vendor productsProducts found: 2106

Ardex WPM 155 Rapid Plus is water-based polyurethane-acrylic hybrid waterproofing membrane developed for high performance undertile waterproofing.

Gripset 38FC is a next generation, water based, fast curing, fibre reinforced SBR latex membrane designed for waterproofing wet areas, showers, laundries, roofs, terraces, balconies, decks, concrete slabs and general structures that will be covered over with toppings, tile beds or overlay finishes.

Fast hardening levelling/ smoothing compound for thicknesses from 3 mm to 70 mm: especially recommended for pumping

335 Premium Flexible Adhesive is a high performance thin-bed adhesive for installing a wide range of tiles and stone including low absorption ceramic tile, porcelain tile, natural and manufactured stone using thin-set method of installation.

INFORMATION ARDEX X 18 ARDEX X 18 is a superior white polymer fortified cement-based wall and floor tile adhesive that has been specially formulated with mastic type properties. It contains specially developed fibres that add strength to the tiled area. ARDEX X 18 has an extended open time,...

High performance, deformable cementitious adhesive with extended open time and no vertical slip for ceramic tiles. Especially suitable for the installation of large-size porcelain tiles and natural stone

Two-component, high-flexibility cementitious mortar (with crack-bridging capacity up to 2 mm) applied by trowel or roller for waterproofing balconies, terraces, bathrooms and swimming pools

Fibre-reinforced levelling compound for interiors for thicknesses from 3 to 40 mm in a single application.

Sikaflex Fillet Sikaflex Fillet Joint is a one component thixotropic and fast curing flexible sealant for professional waterproofing applications. Uses Sikaflex Fillet Joint is used as a general purpose sealant for sealing joint in building construction. Sikaflex®-Fillet Joint is...

The Moonbay pedestal system is an innovative product range which extends the horizons of possibilities for modern construction and architecture. This unique design produced by Moonbay’s extensive research and development team is made from high quality polypropylene and is UV resistant.

INFORMATION ARDEX X 17 ARDEX X 17 is a white polymer fortified cement-based wall and floor tile adhesive that has been specially formulated with mastic type properties. ARDEX X 17 has an extended open time, is non slump and flexible. Mix with water to achieve a mortar suitable for internal...

Gripset BRW-PFN is a self-adhesive butyl rubber sheet membrane with a high strength needle punched fabric facing that supports the application of surface finishes for waterproofing internal and external areas.

ECO SYSTEMS ECO SCREED is a pre blended screed underlayment consisting of graded sand, cement and additives specially formulated for interior and exterior floors prior to the installation of AquaBlokTM waterproofing membranes, ceramic tiles, natural stone, carpet, wood and parquetry flooring. Suitable for a variety of domestic and commercial application.

Kerapoxy Design is a two-component, decorative, acid-resistant epoxy grout ideal for glass mosaics.

Kerapoxy Design is a two-component, decorative, acid-resistant epoxy grout ideal for glass mosaics.

ULTRA MASTIK Key Features Holds 600x600mm Wall Tiles Smooth trowel feel Superior bond strength Premium tile adhesive Ultra Mastik is a large format specialist tile adhesive made to reliably hold up to 600 x 600mm with no slip.  The white colour and smooth texture makes for...

HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.

DTA Aluminum Retro Fit Transition Trim Mat 9-12mm X 3m Long Allows for a gradual transition between floor finishes from 5mm to 16mm rise. Ideal for domestic or commercial applications. Fast fitting and consistent finish. 3m Long. Tested to slip resistance standard AS...

Elastoproof B50 Bond Breaker Joint Band Innovative detailing system designed for waterproofing and sealing all types of joints, junctions and general areas subject to movement. Acting as the required system "bond breaker", the B50 Joint Band will accommodate movement in longitudinal,...

Description High performance, economical, flexible polymer and rubber fortified adhesive for installing a wide range of tile and stone. Provides great coverage and easy to use. Available in grey, 20kg Uses Suitable for a wide range of substrates: Cement sheet Plaster board...

Bostik CONFLEX Designed for demanding or high traffic applications Conflex is a great all-rounder when it comes to adhesive for tiles. It is a premium rubber-modified tile adhesive designed for demanding or high traffic applications.  Recommended Uses Conflex can be used to...

Description High performance, flexible polymer, fortified cement based adhesive for installing tile and stone over a wide range of substrates. Advanced polymer technology promotes a permanent bond when using the conventional mud bed method. Great coverage and easy to use in a range of...

Mapei KERAPOXY ADHESIVE Two-component epoxy adhesive with no vertical slip for ceramic tiles and stone material. TECHNICAL DATA: Pot life of mix: 45 minutes. Open time: 60 minutes. Set to light foot traffic: approx. 10-12 hours. Ready for use: 2 days. Colours: grey Application: suitable...

INFORMATION ARDEX D 2 ARDEX D 2 is a premium dispersion adhesive offering superior non slump and shear adhesion characteristics. Use in wet areas* without compromising adhesion strength over time. Superior non slump capability Excellent workability High flexibility Low odour Unique...

INFORMATION ARDEX FG 8 A smooth, flexible cement-based grout with improved colour integrity. ARDEX FG 8 is suitable for tile joints 1-8mm wide and is exceptionally easy to use on walls and floors. Excellent workability Strong uniform colour Easier to use Smooth finish, flush joints...

Mapei KERABOND PLUS Cement based powder with superior bond strength suitable for all types of tiles and natural stones. Can be used on interior and exterior floor and wall installations of every type of tile and natural stones onto rigid substrates. Technical data: Pot life of mix: over...

High performance, deformable cementitious adhesive with extended open time and no vertical slip for ceramic tiles. Especially suitable for the installation of large-size porcelain tiles and natural stone

Description High performance, flexible polymer, fortified cement based adhesive for installing tile and stone over a wide range of substrates. Advanced polymer technology promotes a permanent bond when using the conventional mud bed method. Great coverage and easy to use in a range of...

Description Commercial grade tile and stone adhesive that is high performance, flexible, Polymer and rubber fortified. Great coverage and easy to use. Available in light grey, 20kg Uses Adheres to a wide range of substrates Cement sheet Plaster board Waterproof membranes...

Bostik EXCELFLEX Flexible and versatile, general purpose tiling adhesive Rubber modified flexible tile adhesive.  Well suited to general tiling where flexibility is desired.  Suitable for domestic and general tiling. Where to Use Residential Commercial Industrial...

INFORMATION ARDEX FS-DD Non-sanded cement-based, wall and floor grouting compound which is specially designed for polished porcelain to avoid scratching the surface of the tile. Water repellent due to special hydrophobing agent Dirt resistant – longer lasting new look, as dirt is unable...

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds.

ARDEX STB Tape Self-Adhesive Butynol® Tape Provides waterproofing seal Highly flexible to accommodate structural movement Used within internal and external environments Information ARDEX STB Tape ARDEX STA Tape ARDEX STB/STA Self Adhesive Butynol® Tape is an uncured butyl...

Sikalastic WPU Elastomeric, single component, fibre reinforced, water based polyurethane membrane. Sikalastic® WPU is a premixed, single component, water based polyurethane waterproofing membrane. Sikalastic® WPU is a Class III membrane with high...

Moonbay Decking Joist Cradle 60mm X 60mm 60mm Joist cradle To hold timber battens, composite battens, aluminum or steel support sections joist, wooden beams. 60mm gap with cross way (suitable for beam size 20-60mm).

PascoFlex PU25 Polyurethane Sealant is a premium grade one-part polyurethane sealant that cures to form a tough and flexible weather-tight seal, capable of accommodating 50% (±25%) joint movement.

DTA Grout / Epoxy Gun Grout Applicator Suitable for normal grout & epoxy grout. Minimises waste & cleanup. Body cartridge is reusable and can easily be replaced with any 50mm PVC pipe.

Gripset P39 Polyurethane Hybrid Membrane Gripset P39 is a versatile, high performance membrane based on advanced hybrid polyurethane technology. Suitable as an exposed membrane in external applications, or for use under tiles and other finishes, P39 offers superior sealing and durable...

INFORMATION ARDEX EG 15 ARDEX EG 15 is a high performance epoxy grout designed for situations that require strict standards of hygiene, high chemical and physical resistance. ARDEX EG 15 is exceptionally easy to clean up during application. It can be used in joints up to 15mm wide on walls...

MAPEMASTIC EASY DESCRIPTION: Ready-to-use paste adhesive with no vertical slip and extended open time for the installation of ceramic tiles on interior walls and floors. APPLICATIONS: For bonding most types of glazed and unglazed ceramic and porcelain tiles and mosaics on...

Pasco Hypersil 912 is a high performance neutral cure sanitary grade silicone sealant which cures to form a tough and flexible waterproof seal with the added advantage of resisting the growth of mould and mildew.

ULTRA LEVEL C500 Superior vinyl and timber underlay ⠀ Product overview Bostik ULTRA LEVEL C500 is a rapid-hardening polymer-modified cementitious underlay, formulated for maximum flow without shrinkage or cracking. ⠀ Product overview Bostik ULTRA LEVEL C500 is a...

Information ARDEX WPM 002 A rapid drying, two part waterproofing membrane specially designed for use under tiles. Advanced acrylic polymers – will not re-emulsify Rapid drying time, normally ready to tile in 16-24 hours Class III two component cementitious membrane that conforms to...

MAPEGUM WPS DESCRIPTION: Fast-drying flexible liquid membrane for interior waterproofing. APPLICATIONS: Liquid waterproofing membrane for interior surfaces provided they are not continually immersed in water or subject to rising damp. Mapegum WPS can be used on all types of...

Kerapoxy Design is a two-component, decorative, acid-resistant epoxy grout ideal for glass mosaics.

A WATER BASED FLEXIBLE PRIMER FOR NON POROUS SUBSTRATES 

The Moonbay pedestal system is an innovative product range which extends the horizons of possibilities for modern construction and architecture. This unique design produced by Moonbay’s extensive research and development team is made from high quality polypropylene and is UV resistant.

Gripset Self Adhesive Butyl Tape Gripset Butyl membrane The Gripset Butyl membrane is a durable, self-adhesive sheet system designed for high performance waterproofing applications in critical areas. With outstanding adhesion properties of the butyl rubber backing, the Butyl Sheet membrane...

INFORMATION ARDEX FS-DD Non-sanded cement-based, wall and floor grouting compound which is specially designed for polished porcelain to avoid scratching the surface of the tile. Water repellent due to special hydrophobing agent Dirt resistant – longer lasting new look, as dirt is unable...

The lightweight deformable adhesive to make tilers’ work easier, ideal for installing large format tiles.

Diarex Ultra Thin Turbo Blade The original Diarex Ultra Thin blade for fast, clean dry-cutting of Porcelain, Granite, Marble and Ceramic tiles. • 7mm high segment Product Type: Diamond Blades (<230mm) Material: Granite, Marble, Porcelain & Ceramic Diameter: 105mm, 115mm, 125mm,...

ARDEX WPM 300 is a two component water based epoxy polyamide membrane/barrier coating.

Mapei PLANICRETE SP Multipurpose latex additive for mortar and cementitious adhesive For the preparation of high performance mortar, screeds and renders. TECHNICAL DATA: Storage: 12 months. Consumption: depends on dilution and thickness of mortar. Packaging: 25 kg drums and 200 kg drums

Description No need to add latex with this factory prepared sand and cement mortar with polymer additives. Available in grey 25kg Uses Can be used as a semi dry screed mortar or add it to a plastic render for a wide range of applications. As a slurry bond coat it can be used as...

INFORMATION ARDEX RA 040 ARDEX RA 040 is a one-component, polyurethane based joint sealant. It has excellent bond strength to most porous and non-porous substrates without the use of a primer. ARDEX RA 040 is non-sag and may be applied on vertical and horizontal surfaces. Typical Uses:...

A sanded, cement-based tile grout. It is ideal for use in joint widths 2mm to 50mm wide without shrinking. Exceptionally easy to use and has superior colour consistency.

ULTRABOND ECO V4 SP Universal adhesive in water dispersion with extended open time and very low emission of volatile organic compounds (VOC) for resilient flooring. Where to use: Internal bonding of: - homogeneous and composition vinyl floor coverings in sheets or in tiles; -...

Mapei ULTRALITE S2 T FLEX One-component, high-performance, highly deformable, lightweight, cementitious adhesive with extended open time and extremely high yield. Easy to apply by trowel with excellent back-buttering capacities, for ceramic, mosaic and stone...

Mapei ULTRALITE S2 T FLEX One-component, high-performance, highly deformable, lightweight, cementitious adhesive with extended open time and extremely high yield. Easy to apply by trowel with excellent back-buttering capacities, for ceramic, mosaic and stone...

Mapei PRIMER G Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling. The surfaces to be treated must be clean and porous. Dilute Primer G...

Mapei KERALASTIC T High performance two-component polyurethane adhesives for ceramic tiles and stone material. Applications: Keralastic is an improved reaction resin adhesive (R2). Interior and exterior floor and wall bonding of ceramic tiles, natural stone and agglomerates, mosaic on all...