Sika

Sika Intraplast Z 10kg Grout/Mortar AdmixturesDescription Intraplast Z-HV is a ready for use admixture in powder form. Intraplast Z-HV causes the cement mixture to expand before setting. By formation of micro bubbles into the wet mix, volume is expanded and fluidity is increased without...

Sikadur®-42 HP is a three-component, multi-purpose, moisture tolerant, epoxy grouting system. It can be used for grouting applications up to 150 mm in depth.

SikaGrout-Ultra is a blend of Portland cement, carefully selected and graded aggregates and Sika Admixtures, enabling it to be self levelling and achieve very high strengths in short times, making SikaGrout-Ultra suitable for critical grouting applications in the most demanding of circumstances.

Sika Primer MB is a solvent free 2-component epoxy-based primer of low viscosity.

Sika Film is a moisture evaporation retardant. It is designed to be used on concrete surfaces to reduce evaporative water loss.

Sikaflex 11FC is a fast curing one-component polyurethane sealant/adhesive with permanent elasticity.

Sikafloor-PU WB is a two component, non-yellowing, water-based polyurethane coating containing UV light absorbers.

A transparent polyurethane paste adhesive. SuperGrip 30 Minute is a versatile, ready to use, fast curing, general purpose construction adhesive.

Sika Backing Rod is manufactured from extruded, open cell polyurethane foam, available in rods with different diameters and lengths.

The Sika AcouBond System consists of the sound dampening, one component adhesive. SikaBond-T53 and the SikaLayer-05 foam mat.

Solvent-free, thixotropic, two part, epoxy resin-based, high performance anchoring adhesive.

The Sikadur-Combiflex SG system is a high performance joint and crack sealing system for construction joints, expansion (movement) joints and connection joints or cracks. The system allows variable and high levels of movement in one or more directions, whilst maintaining a high quality watertight seal. The Sikadur-Combiflex SG system consists of a modified flexible Polyolefin (FPO) waterproofing tape, with advanced adhesion properties and a range of different special Sikadur epoxy adhesives for use in different types of applications and conditions.

Sikaflex-PRO is a one component, thixotropic, polyurethane based joint sealant. It cures under the influence of atmospheric moisture to form an elastomeric material with adhesive properties, in some cases without the need for priming of the substrate.

Sikaflex 11FC is a fast curing one-component polyurethane sealant/adhesive with permanent elasticity.

The Sikadur-Combiflex SG system is a high performance joint and crack sealing system for construction joints, expansion (movement) joints and connection joints or cracks. The system allows variable and high levels of movement in one or more directions, whilst maintaining a high quality watertight seal. The Sikadur-Combiflex SG system consists of a modified flexible Polyolefin (FPO) waterproofing tape, with advanced adhesion properties and a range of different special Sikadur epoxy adhesives for use in different types of applications and conditions.

Sikasil-702 All Purpose is a 1-part neutral curing all-in-one silicone sealant.

Sikasil-702 All Purpose is a 1-part neutral curing all-in-one silicone sealant.

Sikafloor 160 Part B is a 2 part solvent free epoxy primer and binder, modular Sikafloor system.

Sikabond-T55 (J) is a one-part polyurethane adhesive for direct elastic bonding of timber floors. The adhesive is of low viscosity and cures on exposure to atmospheric moisture.

SikaGrout 300 PT (au) is a non-shrink, cementitious grout with a unique 2 phase shrinkage compensating mechanism. It is non-metallic and contains no chlorides. With a special blend of shrinkage-reducing and plasticising/water-reducing agents, SikaGrout 300 PT (au) compensates for shrinkage in both the plastic and hardened states.

A cement-based epoxy-modified 3 component anti-corrosion coating and bonding agent.

Sika CureCrete is a water based membrane forming liquid for curing, dustproofing and hardening concrete. Sika CureCrete is suitable for use over new and old concrete and performs well both inside and outside without the adverse effects of solvent based systems.

ECO SYSTEMS ECO SCREED is a pre blended screed underlayment consisting of graded sand, cement and additives specially formulated for interior and exterior floors prior to the installation of AquaBlokTM waterproofing membranes, ceramic tiles, natural stone, carpet, wood and parquetry flooring. Suitable for a variety of domestic and commercial application.

The Sikadur-Combiflex SG system is a high performance joint and crack sealing system for construction joints, expansion (movement) joints and connection joints or cracks. The system allows variable and high levels of movement in one or more directions, whilst maintaining a high quality watertight seal. The Sikadur-Combiflex SG system consists of a modified flexible Polyolefin (FPO) waterproofing tape, with advanced adhesion properties and a range of different special Sikadur epoxy adhesives for use in different types of applications and conditions.

Sikadur-32 is a high performance bonding agent based on a 2-component solvent free epoxy resin ideally suited to a wide range of building and civil engineering applications.

Sikabond-T55 (J) is a one-part polyurethane adhesive for direct elastic bonding of timber floors. The adhesive is of low viscosity and cures on exposure to atmospheric moisture.

High performance, two-component, water based epoxy primer and waterproofing barrier membrane

Flexible PVC waterstops used to seal construction and expansion joints in concrete structures. Sika®-Waterbars are available in different sizes and types, depending on their use.

Sikabond FoamFix is a gun applied, fast cure and low expansion PUR-foam adhesive for fixing insulation boards and plasterboards to various substrates.

SikaFix HH (au) is a single component hydrophobic polyurethane foam grout that when used alone or with SikaFix HH (au) accelerator, is designed to stop water infiltration and fill voids outside a structure or joint and cracks in concrete structures. It may also be used in applications with high pressure flowing water.

Sikaflex 11FC is a fast curing one-component polyurethane sealant/adhesive with permanent elasticity.

Sikabond-T53 is a one-part polyurethane adhesive for timber flooring systems. The adhesive is of high viscosity and cures on exposure to atmospheric moisture.

SikaGrout GP is a general purpose cementitious grout that is shrinkage compensated. SikaGrout GP is a blend of Portland cement, carefully selected and graded aggregates and admixtures.

Sika® MonoTop®-910 N is a cementitious, polymer modified one-component coating material containing silica fume. (Replaces Monotop 610).

High performance, self-levelling and fast drying compound for interior or exterior use up to 30mm.

The Sikadur-Combiflex SG system is a high performance joint and crack sealing system for construction joints, expansion (movement) joints and connection joints or cracks. The system allows variable and high levels of movement in one or more directions, whilst maintaining a high quality watertight seal. The Sikadur-Combiflex SG system consists of a modified flexible Polyolefin (FPO) waterproofing tape, with advanced adhesion properties and a range of different special Sikadur epoxy adhesives for use in different types of applications and conditions.

Flexible PVC waterstops used to seal construction and expansion joints in concrete structures. Sika®-Waterbars are available in different sizes and types, depending on their use.

High quality, pre-mixed latex liquid primer. Sikafloor Level PRO Primer is a pre-mixed latex liquid designed for the priming of porous substrates prior to the use of Sikafloor® Cement based levelling products.

Flexible PVC waterstops used to seal construction and expansion joints in concrete structures. Sika®-Waterbars are available in different sizes and types, depending on their use.

Sikadur-53 is a pourable high density mortar, based on a 2-component solvent free epoxy resin containing fine fillers. Sikadur-53 is highly insoluble in water and readily displaces water enabling it to be employed in wet and underwater applications.

Sika MonoTop-620 is a cementitious polymer modified mortar containing Silica Fume for use as a finishing and protective top coat for concrete repair patches.

Flexible PVC waterstops used to seal construction and expansion joints in concrete structures. Sika®-Waterbars are available in different sizes and types, depending on their use.

Sika MonoTop-412 NFG is a 1-component, polymer modified, fibre reinforced, low shrinkage structural repair mortar with corrosion inhibitor meeting the requirement of class-R4 of EN 1504-3.

Solvent- and styrene free based two part polyester anchoring adhesive. The two parts found within the single cartridge are mixed in one action through the static mixing nozzle.

Sikagard-63N is a two component solvent-free high build thixotropic protective coating based on epoxy resin. When cured Sikagard-63N provides a hard, glossy film with high resistance to abrasion and chemical attack.

Flexible PVC waterstops used to seal construction and expansion joints in concrete structures. Sika®-Waterbars are available in different sizes and types, depending on their use.

SikaTite-BE is a water based bitumen emulsion modified with acrylic latex polymers. It can be applied as a waterproof membrane, sealant, protective coating or adhesive. It is designed for use underground, internal and immersed areas.

SikaGrout GP is a general purpose cementitious grout that is shrinkage compensated. SikaGrout GP is a blend of Portland cement, carefully selected and graded aggregates and admixtures.

The Sikadur-Combiflex SG system is a high performance joint and crack sealing system for construction joints, expansion (movement) joints and connection joints or cracks. The system allows variable and high levels of movement in one or more directions, whilst maintaining a high quality watertight seal. The Sikadur-Combiflex SG system consists of a modified flexible Polyolefin (FPO) waterproofing tape, with advanced adhesion properties and a range of different special Sikadur epoxy adhesives for use in different types of applications and conditions.

Sika MonoTop®-436 N is a 1-component pre-bagged, pourable, self-compacting, repair mortar meeting the requirements of class R4 of EN 1504-3.

Sika MonoTop-352 NFG is a 1-component, polymer modified, fibre reinforced, low shrinkage light weight structural repair mortar with corrosion inhibitor meeting the requirement of class R3 of EN 1504-3.

SIKABOND INSTANT NAILS is a contact adhesive. Multipurpose, high strength, solvent based adhesive. Excellent adhesion to all common construction materials. Interior and exterior application. Delivers a small amount of flexibility when cured.

Flexible PVC waterstops used to seal construction and expansion joints in concrete structures. Sika®-Waterbars are available in different sizes and types, depending on their use.

Sika® MonoTop® FC is a one component, polymer modified, cementitious levelling mortar containing reactive silica fume. It is based on a formulated blend of very fine natural aggregates. Sika MonoTop FC (AU) is part of the MonoTop System for concrete repair and protection.

SikaGrout-Deep Pour is a blend of Portland cement, carefully selected and graded aggregates and Sika Admixtures, enabling it to achieve high strengths in short times, making SikaGrout-Deep Pour suitable for grouting of large sections and deep pours of up to 500mm.

Sikaflex 11FC is a fast curing one-component polyurethane sealant/adhesive with permanent elasticity.

Sika MonoTop®-723 N is a polymer modified surfacing/finishing mortar, ready to mix, meeting the requirement of class-R3 of EN 1504-3. (Replaces Monotop 620).

Flexible PVC waterstops used to seal construction and expansion joints in concrete structures. Sika®-Waterbars are available in different sizes and types, depending on their use.

Sika CureCrete is a water based membrane forming liquid for curing, dustproofing and hardening concrete. Sika CureCrete is suitable for use over new and old concrete and performs well both inside and outside without the adverse effects of solvent based systems.

Formol is a chemical release agent applied to concrete formwork. It is designed to act as a bond breaker between formwork or moulds and freshly placed concrete.

SikaGrout-212 HP is a blend of Portland cement, carefully selected and graded aggregates and Sika Admixtures, enabling it to achieve high strengths in short times, making SikaGrout-212 HP suitable for grouting fixing bolts and anchors or bedding machinery in the most demanding of circumstances.

Sikagard-680S is a 1-component methacrylic resin based protective and decorative coating. Sikagard-680S protects concrete and most mineral-based substrates against aggressive atmospheres, moisture ingress and carbonation. Sikagard-680S allows two way water vapour diffusion enabling the treated structure to breathe.

Sikadur 55 SLV is a 2-component, 100% solids, moisture-tolerant, epoxy crack healer / penetrating sealer, having a fast tack-free time to minimize downtime. It is a super low-viscosity, high-strength adhesive formulated specifically for sealing both dry and damp cracks. It conforms to the current ASTM C-881, Types I and II, Grade-1, Class-C* and AASHTO M-235 specifications.

SikaGrout-HES is a ready mixed, high quality, grout that sets rapidly with high early strengths. SikaGrout-HES is a blend of high alumina cement, selected and graded aggregates, and Sika admixtures, enabling it to achieve high strengths in short time frame.