Tensor FS900 22 Litres Vinyl Bonding Contact Adhesive
Description
Tensor FS900 22 Litres Vinyl Bonding Contact Adhesive
TensorGrip® FS900 is a fully plasticiser resistant contact adhesive. TensorGrip® FS900 is designed to bond vinyl products such as skirting, wall vinyl and coving. TensorGrip® FS900 is tack ready fast so installation can begin within minutes of the adhesive application.
Advantages
- Plasticiser Resistant
- High Tack
- High Temperature Resistance
- Water Resistant
Properties
- Non Flammable adhesive in flammable propellant
- Web Spray pattern
- Liquid Resistant
Suitable Substrates
- Vinyl
- Wood
- Concrete
- Most subfloors
Technical Data
- Coverage: 230m² per 22L Canister
- Application: 2 sided
- Open Time: 12-15 minutes
- Flash-Off: 2-4 minutes
- Dry Time: 2-4 minutes (dependent on temp & humidity)
- Total Solids: 32 ± 2%
- Failure Temp: > 155°C
- Colour: Clear
- Shelf Life: 12 months from date of manufacture
Directions for Use
Make sure that surfaces are clean, dry and free from dirt, dust, oil, loose paint, wax or grease. For best results, the temperature of the adhesive and the surfaces being bonded should be between 16°C - 27°C. Use with adequate ventilation.
- Shake the canister well before use. Attach and secure hose tightly onto the spray gun with required tip.
- Attach the other end of the hose onto the canister. Make sure the hose-valve connections are securely tight.
- Open the valve on the canister slowly and fully, check for leaks during this process.
- Unlock the trigger on the spray gun to start spraying.
- Spray about 10cm away from the surface at a 90 degree angle.
- Apply a uniform, even coat of adhesive overlapping each pass. If necessary, spray another coat in areas that need more adhesive.
- Apply to both surfaces to be bonded, one surface vertically and the other horizontally.
- Allow the adhesive to tack off until no adhesive transfers to the knuckle when touched.
- Adhere surfaces and press together with adequate pressure. A roller is recommended for even pressure.
Features
Colour
Clear
MPN - Manufacturer Part Number
FS900C
Product Type
- Contact Adhesive ,
- Vinyl Adhesive
Product URL
https://tensorglobal.com/au/products/tensorgrip-fs900-vinyl-bonding-contact-adhesive
Size
22 Litres
Reviews
No reviews found