Thermogroup Econosoft 1.5mm 10m x 1m Acoustic Overlay
Econosoft Acoustic Overlay
Econosoft Acoustic Overlay is an essential cushioning overlay that also acts as a vapour and acoustic barrier. It should be included above Thermofoil in every installation under timber or laminate floors.
Key Features
- Acts as acoustic and vapour barrier
- Essential cushioning overlay for floating floor installations
- Self-adhesive overlap strip for damp-proof bonding
- Smooth side faces down, perforated foam faces up
- Excellent impact sound reduction
- High compressive strength for durability
Technical Specifications
- Roll Size: 10m x 1m
- Thickness: 1.5mm
- Density: 150kg/m³
- Thermal Resistance: 0.014m²kW⁻¹
- TOG Rating: 0.14
- Impact Sound Reduction: 21dB
- Compressive Strength: 200 kPa
Installation Overview
Install Econosoft with the smooth side facing down and the perforated foam facing up. Econosoft should be installed on top of the foil heating system, under the floor finish.
At the edge of the room, roll out the first-row of Econosoft. When you reach the end of the room simply cut the Econosoft with a sharp blade or scissors, taking care not to damage any cables or heating systems that may be present. After fitting the first row of Econosoft, roll out the next section of Econosoft.
Remove the protective film from the self-adhesive overlap strip and stick both rows together, creating a damp-proof bond. Repeat this process until the whole floor is covered, taking care to ensure the self-adhesive joins are made correctly.
Install Econosoft with the joins running in the same direction as the floor finish.
- Acoustic Underlays
No reviews found