Thermogroup Thermorail Spartan Polished Stainless 600mm X 1215mm Round 8-Bars Ladder Heated Towel Rail - 5 Years Warranty

Thermorail Ladder Non-Heated Towel Rail

W600xH1215xD118mm

The S62SCPR is part of our custom plated Heated Towel Rail range. This liquid-filled Heated Towel Rail can be plated in a range of custom finishes at your request. We offer a range of colours as standard which you can view here or you can request an additional custom colour outside of those offered. The warranty on the rail is 25 years for the rail and element, 5 years on the custom plated finish, and 5 years on the element. These rails are plated to order so please note there will be a 4-8 week lead time.

Heated Towel Rails are an affordable luxury for every bathroom for warming and drying your towels. The S62SCPR is a  Liquid Filled Rail, this means the heated towel rail is filled with liquid and heated by an electric element. As the water particles increase in temperature they circulate in the rail thereby heating the entire rail. Liquid Filled rails run at a higher temperature than an equivalent electric heated towel rail.

The towel dryer is 600x1215mm with six horizontal bars in a Polished Stainless Finish. The  Heated Towel Rail comes as a prefilled unit meaning it is simply wired up like a standard towel rail on site. If the element was ever to fail it can be replaced without needing to replace the rail. The wiring position for the rail comes as standard on the right-hand side.

A Liquid Filled Heated Towel Rail will take closer to an hour to reach a maximum temperature of around 55 -60 degrees. The rail can be operated using an on/off switch however we recommend using a timer to allow you to set and forget and control your running costs

Technical Data

Product Code
S62SCPR

Output
150Watts

IP Rating
IPX5

Warranty
5years

Lead Length
1.4m

Voltage
240V

No of Bars
8

Wiring Type
Concealed (hardwired)

Wiring Position
Bottom right hand side

Distance Between Mounting Points (Top to Bottom)
710mm

Distance Between Mounting Points (Left to Right)
568mm

Finish
Polished Stainless Steel

PLEASE NOTE: Specifications are for information purposes only. Whilst every effort has been made to ensure the product specifications are accurate, due to continuing product development and improvement the specifications are subject to change. Specifications can be used to rough in and fit timber supports in the wall however we recommend no holes are drilled without having the product on site or verifying the details with the manufacturer. Thermogroup cannot be held liable or responsible for errors due to updated specifications.