FlooringProducts found: 676

Sikafloor Duraseal is a one component penetrating non-yellowing protective sealer for concrete floors.

Sikaflex 11FC is a fast curing one-component polyurethane sealant/adhesive with permanent elasticity.

LATAPOXY 300 Adhesive is a chemical resistant, epoxy adhesive that will bond to most sound, clean surfaces. The adhesive spreads easily and cleans with water while fresh.

Sikabond-T55 (J) is a one-part polyurethane adhesive for direct elastic bonding of timber floors. The adhesive is of low viscosity and cures on exposure to atmospheric moisture.

Sikafloor-263 SL/264 is a 2-component solvent free pigmented epoxy resin based flooring system. The material can be classified into three systems: 1. Sikafloor-264: a high build roll on coat 2. Sikafloor-263 SL: a smooth self levelling floor topping system 3. Sikafloor-263 NS: an anti-slip self levelling floor topping system.

Sikadur 506 Sand 20kg for Sikafloor 94/91

MVIS™ Veneer Mortar is a patented, versatile polymer fortified mortar designed specifically for the installation of adhered masonry veneer, stone and thin brick.

254 Platinum Adhesive is the ultimate one-step, polymer fortified, thin-set mortar for interior and exterior installation of ceramic tile, stone, quarry tile, pavers and brick.

ARDEX WA 100 is a high strength two part epoxy stone adhesive that exhibits superior bond strength.

315 Super Floor & Wall Adhesive (Previously 290 Super Floor & Wall Thin-Set Adhesive) is a high performance thin-set adhesive to install tile and stone using the thin-bed method of installation. Mix with water or fortify with LATICRETE latex admixture.

335 Premium Flexible Adhesive is a high performance thin-bed adhesive for installing a wide range of tiles and stone including low absorption ceramic tile, porcelain tile, natural and manufactured stone using thin-set method of installation.

A two part, rubber based wall and floor tile adhesive. It is especially formulated to fix tiles over substrates subject to thermal and shrinkage movement.

Eco Systems, Eco-Silent mat is a resilient high performance durable acoustic underlay that provides an isolating layer between structural components or finishes and substrates to significantly reduce and minimise the transfer of impact energy and sound through the substrate. Eco-Silent mat is designed for under tiles, timber and vinyl floors. Is crush resistant and provides excellent noise reduction, vibration reduction and thermal insulation in a variety of building applications. Easy to install and is made from recycled rubber. It remains permanently flexible and is resistant to aging and degradation. Eco Systems Mat is available in a range of thicknesses, making it suitable for a variety of flooring system applications. Eco-Silent Mat is suitable for use with Eco-Systems Silent Mat Adhesive.

STRATA_MAT™ is a next generation high performance uncoupling mat for use under ceramic tile and stone installations, for both residential and commercial applications.

125 TRI MAX™ provides incredible sound isolation protection while simultaneously protecting the tile or stone finish from any cracking by reducing the transmission of stresses in the substrate through to the tile or stone finish.

ARDEX X 7 Wall and Floor Tile Adhesive Weather Resistant Easy to use, universal tile adhesive system 24 hour green bonded screed capable Information ARDEX X 7 ARDEX X 7 is a white cement-based wall and floor tile adhesive. ARDEX X 7 has an extended open time and is non...

211 Crete Filler Powder is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates.

4237 RAPID Latex Additive is a specially designed latex additive for use with 211 to make high strength latex thin bed and medium bed adhesive up to 15 mm. For installing all types of tile, stone and agglomerates.

3701 Fortified Mortar Bed is a polymer fortified blend of carefully selected polymers, portland cement and graded aggregates.

Roofing and Tanking Membrane.