Vendor productsProducts found: 201

TREMcrete HBM is a high build thixotropic synthetic fibre reinforced cement based rheoplastic and non-segregating mortar.

TREMproof RT Plus is primarily used for internal tanking and waterproofing of concrete. It is a two component, acrylic modified cementitious coating that can be fully immersed, (i.e. water tanks).

TREMcrete Activator is a chemically blended aqueous solution, free of chlorides, especially formulated as a Penetrative Corrosion Inhibitor that significantly hardens the surface and increases the durability of concrete.

TREMproof 200EC is a two-component water based epoxy primer designed to act as a vapour retarder on porous substrates, to minimise vapour drive into liquid applied waterproofing membranes.

4mm APP Modified Bituminous Torch Applied Waterproofing Membrane with Mineralised Surface.

Pabkote 3 provides a quick and economical means of applying a heavy bitumen protective coating to most building surfaces.

TREMproof 201/60 is a high-solids, solvent curing modified polyurethane waterproofing membrane that can be applied primer-less to most concrete applications.

One-Part, Low Odour, Rapid Curing Interlaminary Primer for Tremco Polyurethane Products

Tremco Vulkem 350R Grey 15 Litres Base Coat

TREMCO FYREthane is a one component acrylic fire rated sealant which forms after curing a permanently flexible and durable weatherproof and fire rated seal.

Cuspated 6mm protection sheet/roll.

A non-woven, staple, needle-punched, geotextile fabric specifically designed as a high flow rate, soil filtration medium to protect planters from soil erosion.

Vulkem MPU is a solvent based, single component, Class III polyurethane waterproofing membrane designed specifically for internal wet areas.

Multi-composite Drainage and Protection Boards.

TREMproof Façade is a high performance, water based acrylic membrane designed to provide a decorative and protective façade coating.

Vulkem 171 primer is a quick-drying, one-part, moisture-curing primer that enhances adhesion to concrete, plywood and other porous substrates where Vulkem urethane sealants, membranes or coatings will be applied.

TREMcrete NWP is a unique brushable penetrative fine cementitious coating specially designed for waterproofing and protection of old and new concrete against positive and negative water pressure.

Proglaze II is a two-part, high modulus neutral cure structural silicone sealant for in-plant glazing applications.

Xylene solvent used in conjunction with Tremco polyurethane sealants and membranes.

Tremco Aqua-Dam U is a hydrophobic polyurethane compound that is injected in concrete and other sound substrates to stop water.