Ardex WPM 368 20kg Moisture Barrier
Need help with technical specifications or product compatibility?
Chat with Ask TradieCart, our AI specialistArdex WPM 368 Moisture Barrier
Single Part Barrier Membrane
- Water resistant, prevents rising damp, substrate efflorescence and withstands hydrostatic pressure
- Excellent adhesion to most substrates including damp surfaces and freshly laid green concrete
- Built in mechanical key, sand blinding not required
Information ARDEX WPM 368
ARDEX WPM 368 is a single component acrylic copolymer membrane that will prevent rising damp, efflorescence and will resist negative hydrostatic pressure when used in accordance with the technical data sheet. It has excellent adhesion to most substrates including brick, masonry, concrete block, concrete, stone and is simple to use by brush, roller or airless spray machine.
ARDEX WPM 368 single part damp-proof is safe to use and can be over-coated using almost any decorative paint. ARDEX WPM 368 can be applied to damp surfaces and freshly laid hardened (green) concrete and conforms to the Building Code of Australia as a waterproof membrane.
â €Substrates:
- Brick
- Masonry
- Concrete block
- Concrete
- Stone
Technical Data ARDEX WPM 368
Location:
Low water vapour transmission coating and as a barrier/seal coating over freshly laid or damp concrete. Waterproofing barrier on the negative side in below grade surfaces such as basements, tunnels, liftwells, retaining walls and carparks. Waterproofing membrane or barrier coating over freshly laid hardened concrete, prior to the application of conventional levelling compounds carpet and tile adhesives. As a barrier seal coating over damp, green or efllorescence producing concrete prior to overcoating with conventional building paints, ARDEX floor levellers and tile adhesives.
Colours:
- Grey
Coverage: - Water Stop – 45m2 (1 coat)
- Waterproof membrane – 22.5m2 (2 coats)
Drying Times: - Recoat time: 2-4 hrs
- Full cure: 3 days
Pack Size: - 20kg
No reviews found