Ardex WR 80 FR 20kg Polymer Modified Render

Ardex WR 80 FR Polymer Modified Render

Fibre-Reinforced Polymer Modified Render

• Easy to use with superior non-slump and creamy consistency
• Produces a trowel-applied build-up from 2-10mm with a fine finish, with no sagging or cracking
• Fibre-reinforced increased impact resistance and minimised cracking

Information ARDEX WR 80 FR

ARDEX WR 80 FR is a fine-medium grade render and is suitable for rendering walls, both internally and externally, at an application thickness from 2-10mm. When used with an appropriate pump, a build-up of 40mm can be achieved in one coat on concrete and masonry.

⠀Substrates:

• Masonry (Brickwork & Blockwork)
• Concrete Walls
• AAC – Autoclaved Aerated Concrete Blocks and Panels
• EPS Foam Panels**
• Existing Render
• Blueboard**
• Painted surfaces*
  **⠀highly critical application. Light Reflectance Value (LRV) of final coating has to be greater than 40; please contact the coating manufacturer.

⠀Benefits:

• No maturing time required; can be applied immediately after mixing

Technical Data ARDEX WR 80 FR

Location:

• Internal and External
  Thickness:
• 2 – 10mm
• 40mm when spray applied
  Colours:
• Grey Powder
  Drying Times:
• Touch-dry in 1-2 hours and 23°C
• Subsequent coats after 4-8 hours
• Full cure after 7 days
  Packaging:
• 20kg bag