Dribond Micro Seal 4 Litres Penetrating Sealer

Dribond Micro Seal

Clear penetrating sealer for polished porcelain and natural stone.

Description

A clear solvent based sealer for protecting polished porcelain, stoneware, marble, granite and unpolished natural stone surfaces from moisture and helps reduce staining.

Uses

Apply to polished and unpolished natural stone and polished porcelain to protect from moisture and helps reduce staining.
Features

• Long lasting - giving years of protection
• Quick acting - will repel water in 2-4 hours
• Seals and protects the surface from moisture and helps reduce staining
• Will not darken or yellow with age
• May be recoated at any time.

Performance Data

Surface Water Absorption
BS1881 part 5 section 6
Short term (1 hour) 0.0084 mL/m2/sec
Long term (24 hours) 0.0040 mL/m2/sec
Reduces moisture absorption by 91%
Chemical Resistance
Moderate resistance to 10% solutions of acid, alkali and petroleum solvents (removal soon
after spillage is recommended)
Stain Resistance
Reduces the permeability of stains, oils etc., to the surface - immediate removal of the spillage and cleaning will minimise staining.

Coverage

(Approximate) 20-30m2/litre

Specification

The solvent based silicone sealer will not change the appearance of the substrate and be able to reduce water absorption by 91% and helps protect against staining such as Micro Seal manufactured by Construction Chemicals and shall be applied in accordance with the manufacturer’s instructions.

Surface Preparation

The surface to be coated must be sound and clean, free from oil, grease and other contaminants. Completely remove any previous coatings and ensure the surface is dry.
To check the suitability of a sealer, apply a test area before commencing.

Application

On polished natural stone surfaces (eg. marble and granite), and polished porcelain stoneware, apply one application only with a cloth and work into surface irregularities. Immediately remove residue by polishing with a dry cloth. Do not let Micro Seal dry on the surface. If polishing is not sufficient, rub with methylated spirits until excess is removed.