Drizoro Application Brush 150mm Waterproofing Brush
Need help with technical specifications or product compatibility?
Chat with Ask TradieCart, our AI specialistThe Drizoro Application Brush 150mm (MAXBRUSH®) is a heavy-duty, coarse-bristled polyester application brush designed by Drizoro for the application of their cementitious waterproofing range. The 150mm width and stiff polyester bristles push coatings deep into pinholes, hairline cracks, and small surface defects up to 3mm wide that a roller would miss.
Features
- 150mm wide coverage for fast, even application
- Coarse polyester fibre bristles — resist clogging in cementitious slurry
- Solid wooden handle built for repeated jobsite use
- Easy to clean with water immediately after use
Recommended for use with
- Drizoro Maxseal — cement-based waterproof coating
- Drizoro Maxseal Flex — flexible cementitious waterproofing
- Drizoro Maxseal Foundation — below-grade cementitious coating
- Drizoro Maxseal Super — osmotic waterproofing mortar
- Drizoro Maxseal Traffic — trafficable waterproof coating
- Prime coats and slurry mixes from the Drizoro cementitious range
- Application of bonding slurries with Maxrest, Maxrite and Maxroad systems
Application
Wet the substrate before use. Brush the cementitious mix in a uniform direction, pressing firmly to push the coating into pores, voids and hairline cracks. Apply the second coat perpendicular to the first to ensure complete coverage. Rinse the brush thoroughly with water immediately after use to prevent the cement curing on the bristles.
No reviews found