Waterproofing

Sika SikalasticFleece 120 1mtr x 50mtr Roll

Sikalastic ExcelTop High Reflection is a two component, solvent based, acrylic polyurethane UV protective coating for Sikalastic membranes.

Sikalastic ExcelTop High Reflection is a two component, solvent based, acrylic polyurethane UV protective coating for Sikalastic membranes.

SikaTite Moisture Seal 2K is for priming of interior concrete substrates and screeds with high moisture levels. Ready to use. Easy to apply. Rapid cure time.

Sikalastic®-1K is a one component, flexible, fibre-reinforced mortar, based on cement modified with special alkali-resistant polymers. It also contains fine fillers, selected graded aggregates, plus special waterproofing additives to produce a flexible mortar that is ideal for waterproofing surfaces subject to flexural strain.

SikaTite 2-Part is a fast curing, two component, class 2 waterproofing membrane.

SikaTite 2-Part is a fast curing, two component, class 2 waterproofing membrane.

SikaTite® UnderTile is a fast curing, single component, class 3 waterproofing membrane. Water based synthetic rubber waterproofing membrane for under-tile, and protected applications.

SikaTite WPU is a fast curing, UV stable, single component, class 3 waterproofing membrane. Water based modified polyurethane waterproofing membrane for under-tile, and protected applications.

SikaTite® PU is a fast curing, single component, class 3 waterproofing membrane.

Sika Fabric 150mm x 100mtr Roll, 1mtr x 100mtrs Roll

SikaProof A is a FPO based fully bonded composite membrane, which incorporates sealant grid and non-woven polypropylene fleece layer.

SikaProof A is a FPO based fully bonded composite membrane, which incorporates sealant grid and non-woven polypropylene fleece layer.

AQUABLOK WPU is formulated on water based polyurethane polymer technology. The cured membrane is a class 3 with high flexibility. WPU is a premixed, single component, elastomeric waterproofing membrane for use in internal and external applications and under tiled finishes including shower recesses, bathrooms, laundries, decks, balconies, podiums and rooftops. WPU is water based with low VOCs and forms a flexible, seamless waterproofing membrane. It bonds to a wide variety of substrates and is UV stable and may be left exposed. WPU may be recoated in 4 hours, tiled over after 48 hours and can be flood tested 72 hours after the final application. WPU contains micro fibre reinforcement which provides excellent tensile strength and elongation.

AQUABLOK 2 PART is a flexible. Fast-drying, latex modified, cement based, two part waterproofing membrane. AQUABLOK 2 PART can withstand up to 1.5 bar of negative head of hydro-static pressure. It is suitable for internal and external waterproofing of shower recesses, bathrooms, balconies, roofs and decks. AQUABLOK 2 PART is also suitable for areas of continuous water immersion such as swimming pools, spas, water tanks and ponds and is suitable for application over green screeds in internal installations.

AQUABLOK 2 PART is a flexible. Fast-drying, latex modified, cement based, two part waterproofing membrane. AQUABLOK 2 PART can withstand up to 1.5 bar of negative head of hydro-static pressure. It is suitable for internal and external waterproofing of shower recesses, bathrooms, balconies, roofs and decks. AQUABLOK 2 PART is also suitable for areas of continuous water immersion such as swimming pools, spas, water tanks and ponds and is suitable for application over green screeds in internal installations.

AQUABLOK MOISTURE SEAL is a two part, water based epoxy, which chemically cures to form a tough, waterproof vapour barrier that prevents rising damp and continual seepage. Moisture seal can be used as a primer over damp concrete and damp screeds prior to the application of Aquablok waterproofing membranes. Moisture seal is emulsified in water to produce a low VOC product that is ideal for the use in confined spaces.

AQUABLOK BT is a single component, liquid applied, coaltar free, bitumen modified, coal, tar free, moisture cured polyurethane waterproofing membrane designed to form a permanently flexible seamless waterproofing membrane that is impervious to moisture.

Aquablok PU Primer is a moisture curing, single pack, liquid applied polyurethane penetrating primer. It is formulated to compliment Aquablok PU100 & Aquablok BT polyurethane waterproofing membranes. PU Primer improves adhesion & performance of the membrane, improves coverage and application of the subsequent polyurethane waterproofind membrane. Not for use as a primary waterproofing membrane. For use ONLY in conjunction with Aquablok PU 100 & Aquablok BT waterproofing membranes.

Aquablok Reinforcing mat. 100mm wide by 50 lineal metres long.

A WATER BASED FLEXIBLE PRIMER FOR NON POROUS SUBSTRATES 

A WATER BASED FLEXIBLE PRIMER FOR NON POROUS SUBSTRATES 

A WATER BASED FLEXIBLE PRIMER FOR NON POROUS SUBSTRATES 

HYDRO BAN® Adhesive & Sealant is a one component, fast curing, hybrid elastomeric adhesive and sealant.

Cemproof Plug is a quick-setting cement based mortar that instantly stops running water from cracks, fissures, holes or other openings in concrete and masonry.

Cemproof Plug is a quick-setting cement based mortar that instantly stops running water from cracks, fissures, holes or other openings in concrete and masonry.

Catalyst PWC is a biochemical modified silicate solution that provides long-term waterproofing and durability benefits to concrete.

Catalyst PWC is a biochemical modified silicate solution that provides long-term waterproofing and durability benefits to concrete.

Polyfab is a non woven, rot proof polyester fabric for use in conjunction with liquid waterproofing membranes. It is easier to wet out and it possesses superior flexibility to materials such as fibreglass.

Polyfab is a non woven, rot proof polyester fabric for use in conjunction with liquid waterproofing membranes. It is easier to wet out and it possesses superior flexibility to materials such as fibreglass.

Polyfab is a non woven, rot proof polyester fabric for use in conjunction with liquid waterproofing membranes. It is easier to wet out and it possesses superior flexibility to materials such as fibreglass.

Polyfab BB is a 100mm wide self-adhesive non-woven polyester fabric. It incorporates a self-adhesive portion (central 1/3 of tape) that acts as a bond-breaker over joints, cracks or other areas of movement.

Acrylic Modifier represents a new generation of cement modifiers, developed to improve the physical properties of cement mortars and to produce exceptional performance in cement renders. It improves the chemical, corrosion, moisture and salt water resistance of cement renders.

Acrylic Modifier represents a new generation of cement modifiers, developed to improve the physical properties of cement mortars and to produce exceptional performance in cement renders. It improves the chemical, corrosion, moisture and salt water resistance of cement renders.

Mapei MAPETEX SEL Non-woven, macro-holed polypropylene fabric for reinforcing waterproofing membranes. The structure of Mapetex Sel is a series of 1mm diameter holes, which makes it completely permeable to water. Mapetex Sel is available in 25 m-long rolls with a width of 100mm.

Davco Lanko K11 Moisture Barrier Is a 2 part, alkali-reactive waterproofer that prevents the transfer of moisture from the slab. Suitable for internal or external application on below grade surfaces and between horizontal structural slabs and toppings to protect against hydrostatic water...

Nanodefense EcoNanodefense® Eco develops total water-resistance under positive thrust guaranteeing the protection of absorbent substrates or those subject to damp, or in constantly humid environments. Internal application only.

Gripset BRW HD HDPE Reinforced Butyl Rubber Waterproofing Gripset BRW-HD is a self-adhesive butyl rubber sheet membrane with a laminated high strength HDPE film facing designed for subterranean waterproofing and multi layered sheet membrane applications. The high tack butyl backing...

Pond Sealer Colours is a seamless membrane, designed for waterproofing new or renovated fish ponds and water features.

One component water-based polyurethane, Class 3 waterproofing membrane system that meets the requirements of AS3740 by complying with AS/NZ 4858.

Rubber tape sandwiched between two layers of non-woven fabric to form elastic joints in waterproofing systems.

Dripless HD Sausage Gun A Powerful heavy duty, trade quality sausage. Comes with aluminium and clear plastic interchangeable barrels. Features & Benefits Heavy duty and strong Smooth operation Large handle and trigger Option of clear plastic or aluminium barrel...

Bostik Seal N' Flex 1 is a low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough and flexible seal capable of cyclic expansion and compression movement of 100% (+ 50%) of the original installed joint width.

Bostik Seal N' Flex 1 is a low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough and flexible seal capable of cyclic expansion and compression movement of 100% (+ 50%) of the original installed joint width.

Elastoproof B10 Bond Breaker Joint Band Innovative detailing system designed for waterproofing and sealing all types of joints, junctions and general areas subject to movement. Acting as the required system "bond breaker", the B50 Joint Band will accommodate movement in longitudinal,...

Fabric Bandage 140mm X 100m

New Version: https://www.tradiecart.com.au/tremco-vulkem-nem-plus-grey-15-litres-single-coat-polyurethane-membrane/

TREMproof 260 is a polymer-enhanced, single component, fluid-applied, bitumen emulsion, waterproofing membrane.

TREMproof P85 is a 100% solids, spray applied hybrid polyurea waterproofing membrane that allows for rapid installation, and assists with accelerated construction schedules.

TREMproof Façade is a high performance, water based acrylic membrane designed to provide a decorative and protective façade coating.

TREMproof Façade is a high performance, water based acrylic membrane designed to provide a decorative and protective façade coating.

shable Hydroseal is a heavy bituminous, fibre reinforced, rust inhibiting sealing compound, specially designed to be brushed thickly to any surface.

Polyroof LV is a single-component, roof elastomer mastic formulated to ensure elasticity, weather resistance, and durability with ease of application.

Paraseal Permanent Seam Tape is a 1.5 mm thick, rubberized SBS bitumen membrane laminated to a polyethylene reinforcing film.

Tremco Water-Stop is a composite water stop comprised of expandable, granular bentonite. When water comes into direct contact with Tremco Water-Stop, the bentonite clay expands to form an impenetrable barrier which creates a gasket and mitigates further water ingress.

Tremco Water-Stop is a composite water stop comprised of expandable, granular bentonite. When water comes into direct contact with Tremco Water-Stop, the bentonite clay expands to form an impenetrable barrier which creates a gasket and mitigates further water ingress.

TREMproof 90 WB primer is a single-component, waterbourne, acrylic primer designed to act as an adhesion promoting primer and to minimize absorption of the TREMproof 90 into porous surfaces and prevent “green cracking” and other inconsistencies in the waterproof membrane.

Two Component, Epoxy Primer and Incompatibility Barrier

Tremco Vulkem 350NF-R Grey 18.9 Litres Base Coat

Tremco Vulkem 360NF Grey 18.9 Litres Base Coat

Ardex WPM 1955 Hydrophilic Rubber Waterstop Polymeric Hydrophilic Swellable Rubber Joints Specifically designed for marine environments Non-greasy, non-sticky, odourless and non-toxic Maintains effective seal in wet conditions Information ARDEX WPM 1955 Marine Due to its...

Information ARDEX Multiprime ARDEX Multiprime is a water-based primer for improving adhesion of ARDEX products to various porous substrates. Water-based – no solvent hazard Quick drying Improves adhesion Substrates: Fibre-cement sheet Concrete, render, screeds Masonry and lightweight...

DTA Waterproofing Kit A collection of your most used waterproofing tools . Kit includes: 2X 230mm, 10mm nap rollers. 230mm nap roller handle. 100mm brush. Plastic tray. Ideal for waterproofing membrane.

Multi-purpose self-adhesive sealing band designed for flashing and detailing avariety of surfaces. With outstanding adhesion properties of the butyl rubberbacking, the Elastoproof Butyl Tape is ideal for sealing internal and externalsurfaces that require protection against moisture ingress, vibration and flexing.Providing an instant seal to the surface it is applied to, Butyl Tape avoids downtime for drying or curing and can be finished over with Gripset adhesives,membranes, coatings, mortars, adhesives and renders.