Gripset BRW HD Tape 1mm x 70mm x 10m Butyl Rubber Waterproofing

Gripset BRW HD Tape

HDPE Reinforced Butyl Rubber Waterproofing Tape

Gripset BRW HD is a self-adhesive butyl rubber sheet membrane with a laminated high strength HDPE film facing designed for subterranean waterproofing and multi layered sheet membrane applications. The high tack butyl backing provides a high performance waterproof layer with excellent adhesion to porous and non-porous surfaces in a wide range of temperature conditions. BRW-HD membrane has outstanding resistance to vibration, movement and flexing, delivering a waterproofing system that overcomes the limitations of bitumen self-tack and heat applied sheet membranes. Forming an instant waterproof seal when applied onto surfaces, the BRW HD system avoids downtime for drying or curing, delivering rapid application times to enable areas to be in service immediately upon waterproofing completion.

The Gripset BRW HD Tape is used at sheet ends between rolls to seal overlapped sections where there is no sealing strip. BRW HD Tape can also be used as a general detailing tape for all BRW HD applications. All general overlapping between sheets or with the BRW HD Tape should be a minimum of 50mm.

Features

• Self-adhesive application
• Outstanding high bond adhesion to applied surfaces
• Excellent performance in low to high temperatures, -30°C to 80°C
• Bonds and retains adhesion in cold application temperatures
• Excellent resistance to ground salts and chemical agents
• Primer-less application on metallic, plastic and glazed surfaces
• Provides dimensional stability, high tear strength, puncture and impact resistance
• Cold lay application. No torching or heat welding
• Excellent waterproof and vapour resistant properties
• Outstanding flexibility in cold temperatures, no cracking
• No “bleed” or “yellowing”, as per bitumen based products
• No solvent or hazardous primers emitting dangerous fumes
• Instant sealing properties, no drying required
• Solvent free and non-toxic
• Can handle continuously ponding water
• Compliant to AS4858 & AS4654.1 for internal & external wet areas

Uses

• Sealing sheet ends and overlaps in BRW HD installations
• General detailing tape for BRW HD applications
• Underground retaining walls, planter boxes and garden beds
• Roof gardens, basement and lift pit walls
• Plaza decks, podiums, terraces
• Multi layered high performance system with Gripset BRW-PFN

Substrates

• Concrete, screed, concrete block and masonry
• Compressed fibre cement sheeting
• Timber sheeting and structural plywood
• Most metals including galvanised iron, zincalume, stainless steel, copper and aluminium
• Glazed surfaces, marble, granite and ceramics
• Soft and rigid plastics, PVC, DPC films
• Over existing epoxy coatings

Colour/Material: Black HDPE face, black butyl backing

Packaging: 10m x 70mm roll, supplied in box of 16 rolls

Application: Suitable for commercial, industrial and residential applications